Overview
The Method Race Wheels 502 Rally is a 17×8 aluminum spoke wheel with a 5 on 4.5 bolt pattern, a 38 offset and a bronze finish, part number MRWMR50278012938. Method developed the MR502 Rally with Subaru Rally Team USA for its 2014 Rally America Open Class cars, then scaled the preliminary 15-inch low-offset design up to 17-inch and 18-inch diameters.
Method says weight reduction pockets sit in low-stress areas of the wheel to remove mass without giving up strength. The inner lip uses the same I-beam geometry found on the MR501 wheels. The specifications list a 67 center bore and 6.1 backspacing, so compare those with your hub before choosing this size.
Key features
- Developed with Subaru Rally Team USA for 2014 Rally America Open Class cars
- Weight reduction pockets placed in low-stress areas of the wheel
- I-beam inner-lip geometry carried over from the MR501 series
- Aluminum spoke construction in a 17-inch by 8-inch size with a 38 offset
- A decorative center cap ring is part of the wheel’s design.
Rally wheel care
Spoke wheels used on rally cars take repeated impacts from gravel, ruts and curbs, so inspection matters more than with a street wheel. Look at the spokes, lip and inner barrel after each event, and check for hairline cracks around the spoke roots and the center section. A bent lip can allow the tire to lose its seal and bead grip.
Weight reduction pockets are placed in lower-stress areas, so the wheel should be inspected at those points as well. Keep the lug nuts torqued to the level in the vehicle manual, re-check them after the first runs, and clean any grit from the mounting face before fitting the wheel.
Related parts often replaced with rally wheels include tires, valve stems and wheel bearings checked during tire changes. A wheel that has been struck hard should be inspected by a shop before going back on the car.
Specifications
| Brand | Method Race Wheels |
|---|---|
| Part number | MRWMR50278012938 |
| Series | MR502 Rally |
| Style | Spoke |
| Construction | Aluminum |
| Finish | Bronze |
| Wheel diameter | 17 Inches |
| Wheel width | 8 Inches |
| Bolt pattern | 5 on 4.5 |
| Center bore | 67 |
| Offset | 38 |
| Backspacing | 6.1 |
Vehicle fitment
No vehicles are named for this wheel. It is labeled universal fit, but a wheel is only correct when its bolt pattern, center bore and offset suit your hub and clearance. Check those figures against your vehicle before buying.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Bronze is the finish for this 17×8 wheel. Finish color can look different under different light, so view the wheel in person if appearance matters. Check the 38 offset and 6.1 backspacing against brake and suspension parts during a test fit.
What’s included
Confirm lug nuts and center caps before ordering if you need them. Not included: tires.










