Overview
Part MRWMR70178516900 is a Bronze Method Race Wheels 701 Trail Series wheel measuring 17×8.5. Its bolt pattern is 6 on 135, the center bore is 87, the offset is 0 and the backspacing is 4.75, which together determine whether the wheel suits a given hub.
The wheels were developed for off-road racing and refined through finite element analysis studies and field trials. The aluminum body is one-piece cast 356 with T6 heat treatment. Bead Grip, patent pending, engages the tire bead seat for extra grip when the tire runs at low pressure. A reinforced inner lip from race wheel engineering adds rim strength, and both bead seats carry a safety hump that keeps the tire stable and resists de-beading.
Key features
- One-piece cast 356 aluminum
- T6 heat treatment
- Patent pending Bead Grip
- Reinforced inner lip from race wheel design
- Safety humps on both bead seats
- Windowed style with Bronze finish
Matching a set of four
Four wheels that match in bolt pattern, center bore, offset and backspacing are easier to fit and balance than a mixed set. Mixing offsets can change how the tires sit on the hub and the clearance on each corner, which becomes obvious at full steering lock. A spare should match the set in every hub measurement it needs to fit.
Keep spares in mind when choosing a wheel for a trail rig. A spare in the same finish is easier to match when the original gets scraped, and a mismatched spare can look like a repair rather than a plan. Check that the spare fits the same carrier, bed or mount as the rest of the gear before buying.
- Match offset and backspacing across all four
- Balance each wheel and tire
- Check spare fit in its mount
Specifications
| Brand | Method Race Wheels |
|---|---|
| Part number | MRWMR70178516900 |
| Series | 701 Trail Series, MR701 Bead Grip |
| Wheel diameter | 17 Inches |
| Wheel width | 8.5 Inches |
| Bolt pattern | 6 on 135 |
| Center bore | 87 |
| Offset | 0 |
| Backspacing | 4.75 |
| Style | Windowed |
| Construction | Aluminum, one-piece cast 356, T6 heat treatment |
| Finish | Bronze |
Vehicle fitment
This bronze wheel carries no vehicle, year or chassis. Match the 6 on 135 bolt pattern, 87 center bore and 0 offset to your hub, then compare with your vehicle’s wheel requirements. Confirm your vehicle’s year, model and trim before ordering.
Hubs drilled for a different pattern, even another six-lug one, will not accept this wheel.
Installation notes
Confirm the 87 center bore clears the hub before the wheel goes on. Where the hub is larger, a hub-centric ring fills the gap. Lug nut torque should match your vehicle’s torque requirement, and the nuts should be rechecked after the first few miles of driving.
What’s included
One Bronze 17×8.5 wheel is the item described.
Not included: This package covers one Bronze 17×8.5 wheel.
















