Overview
The Method Race Wheels 301 The Standard 17×9 is a 17-inch aluminum spoke wheel with a 9-inch width and a black finish, part number MR30179012512N. It belongs to the MR301 The Standard series. Compare the 5 on 4.5 bolt pattern, 83 center bore, -12 offset and 4.5 backspacing with your vehicle before buying.
Method Race Wheels designs its MR301 wheels for off-road racing, engineering each design for its intended use. Finite Element Analysis and field testing were used in development, with a focus on less weight and more strength. The wheel is finished in black.
Key features
- Spoke style wheel from the MR301 The Standard series
- Aluminum construction
- 17-inch diameter and 9-inch width
- 5 on 4.5 bolt pattern
- Center bore 83
- Offset -12 and backspacing 4.5
- Brand states its designs were checked with Finite Element Analysis and field testing
Negative offset and fender room
A negative offset moves the mounting face outward, so the wheel sits further out from the hub. That shifts the tire toward the fender edge and changes the load on wheel bearings and steering parts compared with a standard offset. Recheck clearance any time the tire size or suspension height changes.
Width adds to that effect. A wider wheel increases the tire’s outward reach, so contact at full lock becomes more likely. Spacers are sometimes used to adjust position, but they change the offset and add stress at the lug studs, so choose them carefully and fit them with suitable hardware.
After mounting, perform a full steering sweep and an articulation check on the suspension. Look for rub marks on the tire sidewall and fender lip, and recheck lug torque after the first drive.
- Check fender lip clearance at full lock
- Watch for sidewall rub on compression
- Verify brake caliper clearance
- Recheck lug torque after the first drive
Specifications
| Brand | Method Race Wheels |
|---|---|
| Part number | MR30179012512N |
| Series | MR301 The Standard |
| Style | Spoke |
| Construction | Aluminum |
| Finish | Black (title: Matte Black) |
| Wheel diameter | 17 inches |
| Wheel width | 9 inches |
| Bolt pattern | 5 on 4.5 |
| Center bore | 83 |
| Offset | -12 |
| Backspacing | 4.5 |
Vehicle fitment
No make, model or year is tied to this wheel. The 5 on 4.5 bolt pattern, 83 center bore and -12 offset all affect fit, so match them to your vehicle before ordering. A negative offset moves the mounting face outward, so check fender clearance as well.
A wheel with a different bolt pattern or center bore will not mount on a 5 on 4.5 hub. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The 9-inch width and -12 offset place the tire further outboard, so check fender, suspension and brake caliper clearance before mounting. Confirm the lug seat style your hardware needs before tightening.
What’s included
This item is one wheel. Confirm the tire, center cap and hardware needs for mounting before ordering.
Not included: Tire, center cap, lug nuts and other hardware: confirm which you need before mounting.











