Overview
Part number MRWMR70178562900 identifies the Method Race Wheels 701 Trail Series 17×8.5 in bronze, with a 6 on 120 bolt pattern and a 67 center bore. It is built as one-piece cast 356 aluminum with a windowed style for off-road use.
Bronze is the finish on this version of the 701. Method’s Bead Grip technology is the main engineering point: a patent pending feature that engages the tire bead seat so the tire grips the wheel at lower air pressures. Method also cites a reinforced inner lip borrowed from race wheel design and an aggressive safety hump on both bead seats. Method lists universal fit, so no vehicle is named; check the 6 on 120 pattern, 67 center bore and 0 offset against your hub before deciding.
The 701 is built for trail driving and rugged use, reflecting the off-road racing focus behind the design.
Key features
- Bronze finish with a windowed profile
- Bead Grip, patent pending, engages the tire bead seat for grip at lower pressures
- Reinforced inner lip taken from race wheel engineering
- Safety hump on the inner and outer bead seats to help prevent de-beading
- One-piece cast 356 aluminum with T6 heat treatment
- Method reports finite element analysis and field tests during development
- Lighter weight and greater strength are the stated design targets
Running lower tire pressures
Running lower tire pressure on rough ground widens the tire footprint and can improve traction on sand, mud and rock. The tire must stay seated on the bead when pressure drops, which is why bead seat design matters on a trail wheel. A bead that slips can deflate a tire quickly, so a bead seat that grips the tire is a meaningful feature for this kind of driving.
Tire choice works alongside the wheel. A sidewall built for low pressure and a tread suited to the terrain each change how the tire responds. Air down gradually, check each tire with a gauge before a run, and reinflate before highway speeds. Inspect the bead area after any hard hit, since a damaged bead seat or inner lip can reduce how well the tire holds.
- Check tire pressure with a gauge before each trip
- Inspect bead seats for dents after rock crawling
- Reinflate to road pressure before returning to pavement
- Keep valve stems in good condition for airing down
Specifications
| Brand | Method Race Wheels |
|---|---|
| Part number | MRWMR70178562900 |
| Series | MR701 Bead Grip |
| Wheel diameter | 17 inches |
| Wheel width | 8.5 inches |
| Bolt pattern | 6 on 120 |
| Center bore | 67 |
| Offset | 0 |
| Backspacing | 4.75 |
| Style | Windowed |
| Finish | Bronze |
| Construction | One-piece cast 356 aluminum, T6 heat treatment |
| Fitment | Universal fit |
Vehicle fitment
This bronze wheel is built for universal fit, so it is not tied to one vehicle. A matching 6 on 120 pattern is necessary but not sufficient; the 67 center bore, 0 offset and 4.75 backspacing also affect how the wheel sits on a hub.
Universal fit means no year, make, model or trim is named. Confirm your vehicle’s year, model and trim before ordering.
What’s included
One 17 by 8.5 inch wheel in bronze with a 6 on 120 bolt pattern.
Not included: Center caps and lug hardware are not included with this wheel.
















