Overview
The Method Race Wheels 309 Grid, part number MRWMR30989087818, is a mesh-style aluminum wheel measuring 18×9 with an 8 on 170 bolt pattern. It belongs to Method’s MR309 Grid series.
Method explains that its wheels were developed specifically for off-road racing, and that each model is engineered for its intended purpose using finite element analysis and field tests. The stated objective is lower weight combined with higher strength. Confirm the bolt pattern and center bore against your hub before you select this wheel.
The finish is gray. Wheel size, bolt pattern and offset are the figures to check against your vehicle first.
Key features
- Mesh-style face in the MR309 Grid series.
- Aluminum build, 18-inch diameter and 9-inch width.
- 8 on 170 bolt pattern with a 131 center bore.
- Offset 18 and backspacing 5.75 measurements.
- Design goal stated by Method: less weight, more strength.
Before you mount
Wheel fit comes down to how the mounting face sits against the hub. Offset and backspacing decide where the tire lands in the wheel well, so a wheel that bolts on can still rub the fender or touch a caliper. Check those clearances with the tire you plan to run, both at full steering lock and at full suspension travel.
Mesh faces collect mud and grit more readily than solid spokes, so a quick rinse after off-road use keeps the openings clear and makes inspection easier. Look at the lip and bead seat after each trip, since a bent edge can cause slow leaks that are easy to miss.
If the center bore is larger than the hub, hub-centric rings can close the gap and carry the load properly. Lug nuts or bolts should match the seat style of the wheel, and they should be torqued in a star pattern once the wheel is seated.
- Inspect the bead seat for scratches after every mount
- Re-check lug torque after the first short drive
- Keep valve stem and tire pressure consistent on all four wheels
Specifications
| Brand | Method Race Wheels |
|---|---|
| Part number | MRWMR30989087818 |
| Series | MR309 Grid |
| Style | Mesh |
| Construction | Aluminum |
| Wheel diameter | 18 inches |
| Wheel width | 9 inches |
| Bolt pattern | 8 on 170 |
| Center bore | 131 |
| Offset | 18 |
| Backspacing | 5.75 |
| Finish |
A few terms: the bolt pattern gives the lug count and the circle they sit on, the center bore locates the wheel on the hub, offset measures the mounting face’s position relative to the centerline, and backspacing measures from the mounting face to the inner lip.
Vehicle fitment
Universal Fit is the fitment category for this wheel. Mounting depends on bolt pattern, center bore, offset and width, so confirm those figures against your vehicle before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Measure the hub before mounting: the 131 center bore has to be at least as big as the hub.
What’s included
Check the package contents against your installation before starting.











