Overview
The Method Race Wheels MR705 18×9 in Matte Black is an 18-inch split-spoke aluminum wheel for a 5 on 150 bolt pattern. Part number MRWMR70589058525 shows offset 25, center bore 111 and backspacing 6. It belongs to the MR705 Bead Grip line that Method designs for lower-pressure running off-road.
The Bead Grip design lets the tire run at lower pressure than a conventional wheel while the bead stays engaged on the rim. Lower pressure can enlarge the contact patch on loose surfaces and reduce the tire’s spring rate. Fit is decided by bolt pattern, offset and center bore.
Key features
- Patented Bead Grip technology that engages the tire bead for more grip at low tire pressures.
- Solid A356 aluminum with T6 heat treatment.
- Split 5-spoke design with 10 windowed openings and a debossed METHOD logo on the face.
- Bead seats carry an aggressive safety hump that helps stop de-beading.
- Reinforced inner lip built from the MRW race wheel design.
- Embossed METHOD Bead Grip logo on a snap-in center cap.
- Push-through cap for 8-lug applications.
- Rated for 2650 lbs. to 3640 lbs., and backed by a lifetime structural warranty per the brand.
Offset, backspacing and clearance
Offset and backspacing decide where the wheel face sits relative to the hub. Changing either moves the tire inward or outward, which affects brake caliper clearance, fender coverage and steering geometry. An 18 inch wheel with a larger tire can reduce clearance in ways a smaller wheel does not.
Tire diameter matters as much as wheel diameter. A larger overall tire height changes speedometer readings and the height of the tire relative to the fender. Check clearance with the tire fitted and the suspension at full compression, not only when the vehicle is parked.
Spacers and offset changes often come up in a build, so approach them with care. Use hub centric parts, torque fasteners to the correct specification, and recheck clearance after any suspension change. Keep a record of the wheel’s measurements for future buying.
- Check caliper clearance at full compression
- Measure tire height change before buying
- Recheck clearance after any suspension change
Specifications
| Brand | Method Race Wheels |
|---|---|
| Part number | MRWMR70589058525 |
| Series | MR705 Bead Grip |
| Wheel diameter | 18 inches |
| Wheel width | 9 inches |
| Bolt pattern | 5 on 150 |
| Offset | 25 |
| Center bore | 111 |
| Backspacing | 6 |
| Style | Split Spoke |
| Finish | Matte Black |
| Construction | Solid A356 aluminum with T6 heat treatment |
| Load rating | 2650 lbs. to 3640 lbs. |
Vehicle fitment
No model year or trim applies to this 18×9 wheel. Its 5 on 150 pattern, 111 center bore, offset 25 and backspacing 6 must be matched to your own hub and clearance. A hub-centric ring may be needed if the bore differs from your hub.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Have the bead seated by a tire shop experienced with Bead Grip rims. Because offset 25 and backspacing 6 change how far the wheel sits, check caliper and suspension clearance once the wheel is mounted on the vehicle.
What’s included
The wheel ships with an embossed METHOD Bead Grip logo on the snap-in center cap. Tires, lug nuts and valve stems must be sourced separately.












