Overview
The Method Race Wheels 701 Trail Series 17×7.5 wheel in Bronze, part number MRWMR70177512930, is an off-road aluminum wheel with a 5 on 4.25 bolt pattern, an offset of 30, a center bore of 73 and backspacing of 5.5. The windowed design is one-piece cast from 356 aluminum and heat treated to T6.
Method’s Bead Grip feature, patent pending, works with the tire bead seat to keep the tire gripping when pressure is run low on trails. An inner lip reinforced with race wheel design adds stiffness, and safety humps on the inner and outer bead seat help the tire stay seated and resist de-beading. Method says finite element analysis and field testing shaped the wheel.
Key features
- One-piece cast 356 aluminum construction with T6 heat treatment
- Patent-pending Bead Grip design for tire grip at reduced pressures
- Inner lip reinforced using race wheel engineering
- Safety humps on the inner and outer bead seat
- Developed with finite element analysis and field testing.
- Windowed style in a Bronze finish
Mounting and balancing a trail wheel
A new trail wheel needs the tire seated and balanced before it sees rough ground. A tire shop with bead seaters can set the bead cleanly, and a road-force or dynamic balance keeps vibration down at speed on washboard roads. Ask the shop to check the valve stem seal while the wheel is off the car, since a worn stem is a common cause of slow leaks that get blamed on the rim.
Mounting also gives you a chance to check the bead seat and the inner lip for scuffs. Light marks are normal, but a deep gouge or a ridge that could stop the tire from sealing is a reason to replace the wheel before it goes off-road. Keep a note of the tire pressure that held seal well so you can repeat it on the next trip.
- Balance the wheel and tire together
- Replace stems that show cracking
- Record the pressure that holds seal
Specifications
| Brand | Method Race Wheels |
|---|---|
| Part number | MRWMR70177512930 |
| Series | 701 Trail Series, MR701 Bead Grip |
| Wheel diameter | 17 Inches |
| Wheel width | 7.5 Inches |
| Offset | 30 |
| Center bore | 73 |
| Backspacing | 5.5 |
| Bolt pattern | 5 on 4.25 |
| Style | Windowed |
| Finish | Bronze |
| Construction | One-piece cast 356 aluminum, T6 heat treatment |
| Fitment | Universal Fit |
Vehicle fitment
The wheel is Universal Fit and is not built for one make, model or year. Fit depends on the 5 on 4.25 pattern, the offset of 30 and the center bore of 73 matching your hub.
Installation notes
Test-fit one wheel before committing to a set, since backspacing 5.5 affects clearance at the brakes and fender. Have a tire shop mount and balance the tire, and recheck the lug nuts after the first drive.
What’s included
This package covers the wheel only.
Not included: Tires, lug nuts and valve stems must be sourced separately.









