Select your vehicle

Method Race Wheels MR312, 18x9 with 8x180 Bolt Pattern – Method Bronze/Black – MR31289088918

Method Race Wheels

Shop Method Race Wheels 18x9 on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Method Race Wheels MR312 18×9 in Method Bronze/Black, part MRWMR31289088918
  • 8 on 180 bolt pattern, offset 18, backspacing 5.75
  • Aluminum construction in a bronze and black finish
  • Concave split-six spoke design described with v.3 Stree-Loc ring
  • Confirm the center bore against your hub before mounting.

Description

Overview

The Method Race Wheels MR312 in 18×9 with Method Bronze/Black is an aluminum street wheel with an 8 on 180 bolt pattern and part number MRWMR31289088918. It suits trucks, Jeeps and SUVs in general, and owners pick the bronze and black face for daily driving or weekend rigs.

This 2018 design was modeled on the 106 Beadlock. Its face is a concave split-six spoke layout, paired with the v.3 Stree-Loc ring and removable stainless steel bolts around the lip. Those bolts are guarded against shearing.

Key features

  • Concave split-six spoke face
  • v.3 Stree-Loc ring
  • Removable stainless steel lip bolts protected against shearing
  • Debossed Method mark on one spoke
  • Bronze and black finish
  • Aluminum construction

Measuring your hub

Hub-centric wheels rely on their bore sitting exactly over the hub’s pilot, so measuring that pilot is the first step after confirming bolt pattern. A caliper gives the most reliable reading, and the measurement should be taken on the hub face where the wheel seats. Keep the readings written down and compare them with the wheel before the tire goes on.

Offset and backspacing influence where the wheel sits against brakes and suspension, so they should be reviewed alongside the hub measurements. A wheel that fits the studs but sits too far in or out can rub or load the bearings unevenly. Lip bolts and the center cap should also be checked once the wheel is in place.

  • Measure the pilot diameter on the hub face
  • Confirm bolt pattern before any other check
  • Test fit with the tire before final torque
  • Inspect the lip bolts after the first drives

Specifications

Brand Method Race Wheels
Part number MRWMR31289088918
Series MR312
Wheel diameter 18 Inches
Wheel width 9 Inches
Bolt pattern 8 on 180
Offset 18
Backspacing 5.75
Style MR312
Finish Bronze (Method Bronze/Black)
Construction Aluminum

Vehicle fitment

Method’s universal fit label is the only fitment statement, and no make, model or year is named. The mention of trucks, Jeeps and SUVs is a general category, not a confirmed match for one vehicle.

Measure your hub’s pilot diameter and compare it with the 8 on 180 pattern before mounting. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

Offset 18 and backspacing 5.75 set how the wheel sits in the fender and against brake parts, so check those clearances before mounting. Confirm the pilot size on your hub before fitting the wheel.

What’s included

The wheel with a bolt-on center cap and the hardware for that cap.

Not included: Tires.

SKU: MRWMR31289088918 Categories: ,

Questions & Answers

What is part number MRWMR31289088918?

It is the 18x9 MR312 in Method Bronze/Black with an 8 on 180 bolt pattern, offset 18, backspacing 5.75 and aluminum construction. Check the pilot size on your hub, because the center bore must match it before mounting.

Why does the style say MR312 instead of a spoke type?

MR312 is the series name, while the face itself is a concave split-six spoke design. Choose by bolt pattern, offset and backspacing rather than the style label when comparing with other wheels.

Does it fit a specific truck?

No specific vehicle is named for this wheel, and it carries a universal fit label. Confirm your vehicle's year, model and trim, and check the 8 on 180 bolt pattern and offset before ordering.

What tools help measure a hub's pilot diameter?

A caliper gives the most accurate reading, and a ruler is enough for a rough check. Measure across the hub face where the wheel seats, then compare the reading with the wheel's bore before mounting.

What should be checked after the first trail drive?

Recheck the lug nuts for torque, look at the lip bolts for looseness, and check for rubbing near the inner barrel. Repeat these checks after the next few outings to confirm everything holds.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Method Race Wheels 18x9 on Amazon