Overview
The Dynomax DYN17632 is a chambered Hush Thrush Super Turbo muffler with 2.25-inch inlet and outlet tubes, a centered inlet and an offset outlet, listed under part number DYN17632.
The muffler uses a reverse-flow design with a 100% aluminized cover for long life, and its spun-locked heads give a leak-free seal. It is universal fit, so the 2.25-inch tube size and tube positions are the main points to check against your exhaust.
Key features
- Chambered muffler design
- Reverse-flow layout routes exhaust through the body and back out.
- 100% aluminized cover for long life
- Spun-locked heads for a leak-free seal
- Centered inlet with offset outlet
- 2.25-inch inlet and outlet tubes
Fitting a chambered muffler
A chambered muffler uses internal baffles to cut noise, so the sound it makes depends on how the chambers are arranged. Reverse-flow designs route the gas through the body and back out, which changes the tone compared with a straight-through unit. Owners who want a deeper tone often pick a chambered style for daily driving.
Because the inlet is centered and the outlet offset, the fit depends on how the pipes arrive. Look at where each tube sits relative to the hangers and the axle or frame. A small change in pipe bend can make the difference between an easy fit and one that needs spacers or new hangers.
Aluminized shells resist heat and surface rust well, but salt, gravel and water still wear them over time. Check the seams and the outlet end every few months, and listen for buzzing or rattles that suggest a loose baffle or clamp. Replace the gasket whenever the joint is opened.
Specifications
| Brand | Dynomax Exhaust |
|---|---|
| Part number | DYN17632 |
| Muffler type | Chambered |
| Inlet location | Centered |
| Outlet location | Offset |
| Tube size (inlet/outlet) | 2.25 inches / 2.25 inches |
| Material | Stainless steel |
| Fitment | Universal fit |
Vehicle fitment
Universal fit, with no vehicle years, makes or models tied to it, so no specific vehicle is confirmed.
Compare the centered inlet and offset outlet with your exhaust routing before fitting. Confirm your vehicle’s year, model and trim before ordering.









