Overview
The Flowmaster Pro Series Muffler, part number FLW13016100, is a 3 inch chambered stainless steel muffler with centered inlet and outlet locations. It is universal fit, so it is not tied to a specific year, make, model or trim. The Pro Series is intended for street trucks, diesel pullers, RV pushers and racing on dirt or asphalt.
It was developed with dyno and track testing and is designed to reduce sound levels across the RPM range. Both ends are 3 inches, so it suits exhaust runs built around 3 inch pipe.
Key features
- Chambered muffler design
- Stainless steel construction
- 3 inch inlet and 3 inch outlet tube size
- Centered inlet and centered outlet locations
- Developed with dyno and track testing
- Universal fit for street, diesel, RV and racing applications
Pipe size and layout matter
A chambered muffler works best when the exhaust pipe diameter matches the muffler inlet and outlet. Because this unit uses 3 inch tubing on both ends, the existing exhaust should be measured before the work starts. Pipe that is too small or too large changes flow and can add noise, so the match matters more than the muffler name.
Routing and clearance decide how the system fits under the vehicle. Keep the muffler away from fuel lines, wiring and the fuel tank, and allow space for heat to dissipate. Mount it on solid hangers and let the exhaust settle into place before final tightening, so the joints do not carry stress.
- Measure diameter at each connection
- Keep clear of fuel lines and wiring
- Allow space for heat to dissipate
Specifications
| Brand | Flowmaster Exhaust |
|---|---|
| Part number | FLW13016100 |
| Muffler type | Chambered |
| Material | Stainless steel |
| Tube size (inlet/outlet) | 3 inches / 3 inches |
| Inlet location | Centered |
| Outlet location | Centered |
| Fitment | Universal fit |
Vehicle fitment
Suitability depends on pipe diameter, routing and clearance rather than a model year. Measure the existing exhaust and confirm the fit for your application before installing.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Both ends are 3 inches, so measure the existing pipe diameter before fitting the muffler. Plan the mounting around your own exhaust layout, using clamps or hangers suited to your pipe. Exhaust parts stay hot after running and have sharp edges, so let the system cool and wear eye protection and gloves during fitting.
What’s included
Look over the delivered parts for hardware and hangers before starting the install.
Not included: Exhaust piping, clamps and hangers are not confirmed as included, so plan for the rest of the exhaust run separately.









