Overview
The MagnaFlow 14839 is a polished stainless steel performance muffler with a straight-through core, a centered 2.25 Inches inlet and a centered 4 Inches outlet. It is a universal fit design, so pipe diameter and outlet placement determine whether it suits your vehicle.
The body is 100% polished stainless steel, lap-joint welded and built for demanding conditions. A free-flowing perforated core carries exhaust through the can, wrapped in stainless mesh and packed with acoustical fiber fill. The packing is meant to protect sound quality over time, and the muffler carries a Lifetime Warranty.
Key features
- Centered 2.25 Inches inlet
- Centered 4 Inches outlet
- 100% polished stainless steel body
- Lap-joint welded construction
- Free-flowing perforated core
- Acoustical fiber fill and Lifetime Warranty
Fit checks before buying
Before buying any universal fit muffler, measure the exhaust at the point where the new can will connect and again at the tailpipe. Note the diameter, the length of straight pipe available, and the position of existing hangers. These measurements show whether a direct fit is possible or whether extra sections will be needed.
Chassis clearance is the next check. Look at the axle, floor pan, fuel lines and bumper with the old muffler still in place, then decide where the new can will sit. A performance core can be heavier and longer than stock, so allow room for the can to move slightly under load without touching anything.
- Measure pipe at the connection point
- Note existing hanger positions
- Check clearance with the old can removed
Specifications
| Brand | MagnaFlow Exhaust |
|---|---|
| Part number | 14839 |
| UPC | 841380013743 |
| Muffler type | Straight Through |
| Material | Stainless Steel |
| Finish | Polished |
| Inlet location | Centered |
| Outlet location | Centered |
| Tube size (inlet/outlet) | 2.25 Inches/4 Inches |
| Warranty | Lifetime Warranty |
Vehicle fitment
The 14839 is a universal fit design with no specific years or models tied to it. Match the 2.25 Inches inlet and 4 Inches outlet to your exhaust layout.
A universal fit muffler does not confirm clearance to the axle, floor or bumper on a given vehicle. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the outlet is larger than the inlet, the connecting pipe will need a step-up section. Hangers should hold the can steady so the pipe joints carry no weight.
What’s included
The muffler is the item described.
Not included: Pipe sections, clamps and hangers are required for installation.









