Overview
The MagnaFlow 14356 is a straight-through polished stainless steel muffler with 2.5-inch inlet and outlet tubes, an offset inlet and a centered outlet. It is universal fit, so the vehicle match depends on pipe diameter and the position of the inlet and outlet.
The muffler body is 100% polished stainless steel, lap-joint welded for a rigid build. A perforated stainless steel core carries exhaust straight through, surrounded by stainless mesh and acoustical fiber fill. The tight packing helps keep the tone steady over time, and a Lifetime Warranty applies.
Key features
- Offset inlet location with a centered outlet
- Equal 2.5 Inches tube sizes at both ends
- 100% polished stainless steel body
- Lap-joint welded seams
- Straight-through perforated core
- Acoustical fiber fill and Lifetime Warranty
Offset inlet and pipe alignment
An offset inlet means the connecting pipe has to meet the muffler from a particular side, so the mounting position matters. Dry-fit the pipe and hangers before tightening anything, and check that the muffler clears the floor, crossmember and fuel lines. A centered outlet keeps the tailpipe exit in the middle, which helps when the rear bumper is tight.
Polished stainless mufflers can be cleaned easily, but harsh chemicals should be avoided because they dull the finish. Equal tube sizes at both ends keep the installation simple, though the pipes still need support so they do not sag or touch the body. Look for worn rubber hangers and cracked clamps during routine inspections.
- Dry-fit before tightening clamps
- Support pipes so they do not touch the body
- Replace worn rubber hangers
Specifications
| Brand | MagnaFlow Exhaust |
|---|---|
| Part number | 14356 |
| UPC | 841380002556 |
| Muffler type | Straight Through |
| Material | Stainless Steel |
| Finish | Polished |
| Inlet location | Offset |
| Outlet location | Centered |
| Tube size (inlet/outlet) | 2.5 Inches/2.5 Inches |
| Warranty | Lifetime Warranty |
Vehicle fitment
It is universal fit, with no vehicle models named. Compare the 2.5-inch tube size, offset inlet and centered outlet with your current exhaust to judge fit.
Universal fit does not mean every chassis has room for an offset inlet. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The offset inlet means the connecting pipe has to line up with the side of the muffler, so dry-fit the pipe before tightening the clamps. Keep both 2.5 Inches connections matched to the pipe on each end.
What’s included
The muffler is the only item described.
Not included: Pipe sections and clamps are needed to connect this muffler, so have them ready before starting the install.
