Overview
The MagnaFlow 14832 is a straight-through stainless steel street performance muffler with tips. It has a centered 2.25 Inches inlet and a centered 4 Inches outlet. It is a universal fit design, so tube size and layout matter more than a vehicle model.
The muffler is made from high quality materials and tuned for import engine needs, with a focus on flow and performance. It produces a smooth, deep tone, and tip and body options let owners pick a style. Tips are included with this model.
Key features
- Centered 2.25 Inches inlet
- Centered 4 Inches outlet
- Straight-through stainless steel design
- Tips included with the muffler
- Tip and body options for styling
- Tuned for import engine needs, per the brand
Heat and tailpipe clearance
Exhaust gas leaves a muffler very hot, and a larger outlet can carry that heat closer to the bumper, fuel tank area or rear suspension. Keep the tail at a distance from plastic trim and wiring, and use heat shields where clearance is tight. Stainless steel handles heat well, but the nearby parts still need room.
Check the outlet regularly for discoloration, cracks at the welds and loose tip fasteners. Rust may appear on the mounting points before the body shows any wear, so inspect hangers and clamps at each service. A small rattle at idle often points to a loose mount that should be fixed before it grows into a bigger problem.
- Keep heat away from wiring
- Inspect tip fasteners after early drives
- Check welds for hairline cracks
Specifications
| Brand | MagnaFlow Exhaust |
|---|---|
| Part number | 14832 |
| UPC | 841380003676 |
| Muffler type | Straight Through |
| Material | Stainless Steel |
| Inlet location | Centered |
| Outlet location | Centered |
| Tube size (inlet/outlet) | 2.25 Inches/4 Inches |
| Tips | Included, per the title |
Vehicle fitment
It is a universal fit design with no vehicle years or models tied to it. Compare the 2.25 Inches inlet and 4 Inches outlet with your existing exhaust.
A centered outlet still needs rear clearance checks on your chassis. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The jump from a 2.25 Inches inlet to a 4 Inches outlet means the pipe run needs a transition section. Check how the larger outlet clears the bumper and rear suspension before tightening the clamps.
What’s included
Tips come with this model. Tip and body options allow you to change the look, so confirm the included tip style before installing.
Not included: Connecting pipe and mounting hardware are needed to complete the installation.
