Overview
The K&N 63-1563 is a 63 Series Aircharger kit that replaces the factory airflow assembly, including the filter, air box and air path. It uses a K&N intake with a cold air layout and a partial enclosure filter housing, and K&N identifies it under part number 63-1563.
Estimated gain is 17 HP. Confirm fit for your vehicle’s year, model and trim before ordering.
Key features
- Estimated gain of 17 HP
- Free-flowing high density polyethylene tube
- Washable, reusable lifetime air filter
- Partial enclosure filter housing with cold air intake
- Oil-type filter
- Inlet tube included
Keeping a reusable oil filter working
A reusable oil filter needs regular attention to keep airflow and filtration working as intended. Oiled filters are usually cleaned with a dedicated filter cleaner, rinsed, dried fully and then re-oiled with the correct filter oil. Keeping the filter clean helps maintain consistent airflow across varied driving.
Inspect the filter edges, seams and gasket surface each time it comes out. Look for tears, collapsed pleats or oil saturation that could let unfiltered air reach the throttle body. A cold air layout also draws air from a different area of the engine bay than stock, so keep the intake clear of debris near the inlet.
- Clean and re-oil after dusty trail use
- Check the inlet tube clamps after the first few drives
- Look for oil pooling inside the intake tube
- Replace the filter once the pleats are damaged
- Keep water away from the intake opening
Specifications
| Brand | K&N |
|---|---|
| Part number | 63-1563 |
| UPC | 70000596882 |
| Estimated power gain | 17 HP |
| Filter housing type | Partial enclosure |
| Intake type | Cold air |
| Filter type | Oil |
| Inlet tube | Included |
| Tube material | High density polyethylene |
| Fitment type | Direct fit |
Vehicle fitment
Check that your vehicle’s year, model and trim match this kit before ordering.
Compare your vehicle’s year, model and trim with the kit’s application before buying.
Installation notes
Plan the swap around removing the stock air box and filter, since this is a full intake replacement. A typical installation takes 90 minutes or less.
What’s included
The inlet tube is included, and the filter housing and air path are replaced. Check the package contents against your installation before starting.














