Overview
The K&N 57-2560 is a cold air performance intake in the 57 Series, made for the 2004–2008 Ford Ranger and the 2004–2007 Mazda B3000. It uses an open filter housing and an inlet tube in place of the factory airflow assembly, so it replaces that assembly as a complete air path.
The estimated gain is 10 HP. The filter is washable and reusable, and the kit is covered by K&N’s Million Mile Warranty. Cold air intakes draw air from a location away from the engine, which is the intake type of this kit.
Owners of these trucks who want an intake with a reusable filter can use part number 57-2560 with the fitment details below to confirm the match.
Key features
- Estimated gain of 10 HP
- Open filter housing for the 57 Series design
- Free-flowing high density polyethylene tube
- Washable and reusable lifetime air filter
- Cold air intake type with direct fit listed
- 50 State Legal with CARB E.O. D-269-37
Care and filter inspection
A reusable cold air filter needs routine attention to keep it doing its job. Pull the filter at each oil change or whenever the air box is opened, and look for dust loading, torn pleats or a seal that no longer sits flush. A filter that is clogged or damaged will restrict flow and can let unfiltered air reach the engine, so replace it when cleaning no longer restores its condition.
An open housing and inlet tube sit in the engine bay where heat, road spray and debris can reach them. After installation, check that the tube has clearance from hoses, wiring and the radiator support, and inspect the clamps for looseness after the first few drives. Tighten or reposition anything that has moved. Cold air intakes work best when the whole path stays sealed, so a small leak at a clamp can cost more than a clean filter gains.
Specifications
| Brand | K&N Filter |
|---|---|
| Part number | 57-2560 |
| UPC | 24844109149 |
| Series | 57 Series |
| Intake type | Cold air |
| Filter housing type | Open |
| Filter type | Oil |
| Inlet tube | Included |
| Fitment type | Direct fit |
| Estimated horsepower gain | 10 HP |
| Emissions status | 50 State Legal, CARB E.O. D-269-37 |
| Warranty | Million Mile Warranty |
| Country of manufacture | U.S.A. |
Vehicle fitment
The manufacturer list has two entries: the 2004–2008 Ford Ranger in Edge, STX, Sport, Tremor, XL and XLT trims, and the 2004–2007 Mazda B3000 in Base, DS and SE trims.
Ranger years before 2004 or after 2008, Mazda B3000 years outside 2004–2007 and other Mazda truck models are not on the list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
K&N lists installation time at usually 90 minutes or less. Because the open housing and tube take the place of the factory assembly, make sure the tube clears other engine bay parts before tightening the clamps.
What’s included
An inlet tube is included, and the washable filter is the main serviceable part. Check the package contents against your installation before starting.









