Overview
The K&N 57-3051 is a 57 Series performance air intake kit for the 2004–2006 Chevrolet Colorado and GMC Canyon trucks. It is a cold air intake with a partial enclosure filter housing, an inlet tube and an oil-type filter, and it covers Z71 and Z85 versions of both trucks.
This kit replaces the stock air box, filter and air path as one assembly.
Key features
- Cold air intake system type
- Partial enclosure filter housing
- Inlet tube included
- Oil filter type
- Direct fit design for the listed Colorado and Canyon trims
Before you install on a Colorado
A pickup used for hauling or trail driving depends on a steady supply of clean air at all engine speeds. Before installing a cold air intake, clear the area around the old air box and check for debris that could fall into the opening. Keep the filter and tube protected from grease and dust while working on the install.
Colorado and Canyon owners often use these trucks off road, where dust and water are common. Inspect the oiled filter after each trip and clean it when the surface looks loaded. Check the inlet tube and clamps for looseness, since a small leak can let dirt past the filter and cause a rough idle or a warning light.
- Protect the opening while the old box is removed
- Clean the filter after dusty trips
- Tighten clamps before the first drive
Specifications
| Brand | K&N Filter |
|---|---|
| Part number | K/N57-3051 |
| Intake system type | Cold air |
| Filter housing type | Partial enclosure |
| Filter type | Oil |
| Inlet tube | Included |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2004–2006 Chevrolet Colorado and 2004–2006 GMC Canyon in the trims named in the Vehicle fitment section, including the Z71 and Z85 versions of both.
Trailblazer, Envoy and Ascender models are not part of this fitment, and Colorado or Canyon model years outside 2004–2006 are not on this list. Confirm your vehicle’s year, model and trim before ordering.
What’s included
Inlet tube included, per the specifications. No other parts are named, so review the kit contents before you install.









