Overview
The K&N Filter 57 Series Performance Air Intake Kit, part number 57-3061, is a cold air intake that K&N says completely replaces the factory airflow assembly, including the filter, air box and air path. It is aimed at drivers who want more air reaching the engine, and K&N estimates a gain of 19 HP from the upgrade.
The kit centers on a free-flowing high density polyethylene tube and a washable, reusable lifetime air filter that uses oil. It is a cold air intake that draws more air through an engineered intake design. It is a Direct Fit design, and fit depends on your vehicle’s year, model and trim, so confirm those before ordering.
Key features
- Replaces the factory filter, air box and air path
- Free-flowing high density polyethylene intake tube
- Washable and reusable lifetime air filter
- Estimated gain of 19 HP
- Direct Fit design with a partial enclosure housing and cold air intake style
- Backed by the K&N Million Mile Warranty
Caring for an oil filter
An oiled cotton-style air filter needs regular attention to keep airflow and filtration working as intended. Washable filters like this one are cleaned rather than replaced, but the oil must be reapplied after each cleaning so the filter traps dust effectively. Clean the element with a cleaner made for oiled filters, let it dry fully, and then apply a light, even coat of filter oil before reinstalling it.
Inspect the filter and tube at each oil change or every few months of rough use. Look for tears in the filter media, cracks in the polyethylene tube, and clamps that have loosened. Dust that gets past a damaged filter can wear the engine’s intake surfaces over time, so a visible tear is a reason to replace the element right away.
- Check clamps after the first few drives
- Re-oil the filter after every cleaning
- Store spare filter oil away from heat
Specifications
| Brand | K&N Filter |
|---|---|
| Part number | 57-3061 |
| UPC | 24844232441 |
| Estimated power gain | 19 HP |
| Intake type | Cold Air |
| Filter housing type | Partial Enclosure |
| Filter type | Oil |
| Inlet tube | Included |
| Fitment | Direct Fit; vehicle list not stated |
| CARB E.O. number | D-269-37 |
| Warranty | K&N Million Mile Warranty |
| Made in | The USA |
Vehicle fitment
Fit cannot be confirmed for the 57-3061 without a vehicle year, make, model and trim. Confirm your vehicle’s year, model and trim before ordering.
Check K&N’s manufacturer specifications for the 57-3061 before buying. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Installation usually takes 90 minutes or less. Because the kit replaces the air box and air path, the factory airflow components come out before the new tube is fitted. Take care not to strain the intake sensor wiring while reinstalling the tube.
What’s included
The inlet tube is included, and the kit uses a washable, reusable lifetime air filter.









