Overview
The K&N 57-2527 is a performance air intake kit for the 1997–2000 Ford Explorer, Ford Explorer Sport, Ford Ranger and Mazda B4000, based on the manufacturer fitment list. It is a cold air intake that takes the place of the factory airflow assembly, using an open filter housing, a high density polyethylene tube and an oil-type filter that can be washed and reused.
It takes the place of the stock filter, air box and air path as a complete intake. The estimated gain is 3 HP. It is covered by the Million Mile Warranty and is made in the U.S.A.
Key features
- Free-flowing high density polyethylene tube
- Open filter housing for a cold air intake design
- Washable, reusable oil-type filter rated for lifetime use
- Estimated gain of 3 HP, with a guarantee of increased horsepower from K&N
- Inlet tube included with the kit
- Backed by the Million Mile Warranty
- Made in the U.S.A.
- 50-state legal, CARB E.O. # D-269-18
Engine bay heat and airflow
Air drawn from the engine bay is warmer than outside air, and heat soak can reduce the density of the intake charge. An intake that draws from a cooler area of the bay, or takes air from the front of the vehicle, usually keeps the charge cooler under load. Routing the inlet tube away from the radiator fan and exhaust manifold helps keep the air temperature steady.
Older trucks and SUVs often have worn hoses, cracked vacuum lines and aging clamps. After an intake swap, check these connections for leaks, since unmetered air can cause rough idle and fault codes. Keep the battery disconnected while working in the engine bay, and let the engine cool before handling hot parts.
- Route the tube away from the fan and exhaust
- Inspect vacuum lines after the swap
- Let the engine cool before starting work
Specifications
| Brand | K&N Filter |
|---|---|
| Part number | 57-2527 |
| UPC | 24844091109 |
| Intake type | Cold air |
| Filter housing type | Open |
| Filter type | Oil (washable, reusable) |
| Inlet tube | Included |
| Tube material | High density polyethylene |
| Estimated horsepower gain | 3 HP |
| CARB E.O. number | D-269-18 (50-state legal) |
| Warranty | Million Mile Warranty |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 1997–2000 Ford Explorer in Eddie Bauer, Limited, Postal, XL, XL Fleet, XLS and XLT trims; the 1997–2000 Ford Explorer Sport; the 1997–2000 Ford Ranger in STX, Splash, Sport, XL and XLT trims; and the 1997–2000 Mazda B4000 in Base, SE and Troy Lee trims.
Model years outside 1997–2000 are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
K&N puts the typical time for fitting this kit at 90 minutes or less. Because it replaces the stock filter, air box and air path, remove the factory assembly before fitting the included inlet tube, and work with the engine cool.
What’s included
The kit includes the inlet tube and the washable K&N air filter.









