Overview
The K&N Filter 57-1506-2 is a performance air intake kit for the 1993–1998 Jeep Grand Cherokee (ZJ). It is a stock-upgrade intake that replaces the factory airflow assembly, including the filter, air box and air path. It is designed to increase power, with an estimated gain of 25 HP.
The intake uses a free-flowing high density polyethylene tube and reuses the factory inlet tube. The filter is an oil-type element in an open filter housing that can be washed and reused, so it does not need to be replaced on a regular basis.
Key features
- Free-flowing high density polyethylene intake tube
- Washable and reusable oil-type air filter in an open filter housing
- Stock-upgrade intake that reuses the factory inlet tube
- Estimated gain of 25 HP
- Easy to install, usually in 90 minutes or less
- Made in the U.S.A.
- 50 State Legal, CARB E.O. # D-269-13
Working on a stock-upgrade intake
A stock-upgrade intake reuses the factory inlet tube, so the work focuses on the filter housing and the air path behind it. The clamps and seals on that reused tube deserve a close look before the new intake goes on, since a worn seal can undo the airflow gain. Older vehicles often have brittle hoses that crack when disturbed, so replacing a suspect hose during the job is a sensible step.
Open-element filter housings are exposed to more road spray and dust than enclosed designs. Check the filter after wet or muddy trips and clean it when it looks loaded. A simple hose and clamp inspection at regular intervals helps keep the intake sealed and the engine breathing as intended.
- Replace hardened vacuum or breather hoses
- Confirm the filter sits square in the housing
- Check the tube for cracks where it meets the throttle body
Specifications
| Brand | K&N Filter |
|---|---|
| Part number | 57-1506-2 |
| UPC | 24844118905 |
| Series | 57 Series Performance Air Intake Kit |
| Intake type | Stock upgrade |
| Inlet tube | Reuse factory |
| Filter housing type | Open |
| Filter type | Oil |
| Tube material | High density polyethylene |
| Estimated horsepower gain | 25 HP |
| Emissions approval | 50 State Legal, CARB E.O. # D-269-13 |
| Warranty | K&N Million Mile Warranty |
Vehicle fitment
The manufacturer fitment list covers the 1993–1998 Jeep Grand Cherokee (ZJ) with 5.9, Base, Laredo, Limited, Orvis, SE and TSi trims.
Other Grand Cherokee generations, such as the WJ (1999–2004) and WK, are not on the list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The factory inlet tube is reused, so the work centers on the filter housing and air path. Installation usually takes 90 minutes or less. Work with the engine cold and the key off while the factory airflow assembly is removed.
What’s included
The kit replaces the factory filter, air box and air path. Check the package contents against your installation before starting.









