Overview
The K&N 63-2599 AirCharger is a cold air intake for the 2017–2018 Ford F-150 with the 3.5L EcoBoost V6 engine. It also fits the 2018 Ford Expedition, the 2018 Ford Expedition Max, the 2018 Lincoln Navigator and the 2018 Lincoln Navigator L.
The system replaces the factory air filter and air intake housing. A chrome topped K&N high-flow filter and a heat shield fit into the original air box space, and an aerodynamically engineered tube directs air into the throttle body and turbo inlet. K&N says smoother airflow lets the engine inhale more air, for more usable power and a guaranteed power gain.
Key features
- Replaces the entire factory air intake system
- Full enclosure filter housing with a cold air intake type
- Tube accommodates the factory air temperature sensor
- Oversized cone shaped filter that can be used for up to 100,000 miles, depending on driving conditions
- Washable and reusable lifetime oil filter with a chrome top
- Covered by the K&N Million Mile Limited Warranty
- Not legal for highway use in states adopting California emission regulations
Full enclosure intake basics
A full enclosure housing seals the filter inside a closed box, so the element is shielded from the engine bay and from dust that would otherwise come in around the edges. That protection helps the filter stay cleaner between services. Turbocharged engines such as the 3.5L EcoBoost V6 also depend on steady air supply to the turbo inlet, so the tube should sit cleanly with no kinks.
Care is simple but regular. Wash the chrome topped cone filter when it looks dirty, let it dry fully, then re-oil it before reinstalling. Check the housing seals and the factory air temperature sensor connection after each installation and after any heavy off-road trip.
- Keep the tube free of kinks and crushed sections
- Confirm the air temperature sensor is seated fully
- Re-oil the filter lightly to avoid excess oil
Specifications
| Brand | K&N Filter |
|---|---|
| Part number | 63-2599 |
| UPC | 24844367419 |
| Engine | 3.5L EcoBoost V6 |
| Intake type | Cold air |
| Filter housing type | Full enclosure |
| Filter type | Oil, chrome topped cone |
| Inlet tube | Included |
| Fitment type | Direct fit |
| Filter service life | Up to 100,000 miles, depending on driving conditions |
Vehicle fitment
It fits 2017–2018 Ford F-150 models, 2018 Ford Expedition and Expedition Max models, and 2018 Lincoln Navigator and Navigator L models. Confirm your trim before ordering.
The 2017–2018 F-150 model years are covered, and F-150 model years 2019 and later are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
K&N describes installation as usually taking 90 minutes or less, using the vehicle’s existing factory mounting points. The tools needed are a screwdriver and an Allen wrench. Work with the engine cold and the battery disconnected.
What’s included
The kit includes the chrome topped K&N high-flow air filter, the heat shield and the intake tube.




















