Overview
The King Shocks 25001-181 is a Performance Series rear shock kit for the 2007 to 2017 Jeep Wrangler JK, sold as a pair. It fits 2-door and 4-door models with 0 to 2 inch lift kits, and uses gas charged shocks with remote reservoirs.
The kit is tuned to the vehicle through real-world testing of its damping curve and spring rate. The shafts are large diameter and micro-polished, and the reservoirs are 6063 aluminum alloy, which helps them dissipate heat. The remote reservoirs connect with Aeroquip high pressure hoses, and installation is a bolt-on job.
Key features
- Rear position, sold as a pair
- Covers 2 and 4-door Wrangler JK models
- Gas charged damping
- Large diameter micro-polished shafts
- Aeroquip high pressure hoses on remote reservoirs
- 6063 aluminum alloy reservoirs
- Bolt-on installation
Rear shock wear and replacement
Rear shocks handle axle movement under braking, on uneven pavement and across off-road ledges. Over time the valving and seals wear, and the shock stops controlling movement as it should. A worn rear shock often shows up as a bouncy tail, rear sway through corners, or uneven tire wear along the rear tread.
Replace rear shocks as a pair so both sides damp the same way. During the job, check the mounting bolts, rubber bushings and bump stops, since a worn bushing can make a new shock feel loose. Keep the remote reservoir hoses away from the axle and springs throughout the install.
- Inspect both rear shocks for leaks
- Check bushings and bump stops
- Keep hoses clear of the axle
Specifications
| Brand | King Shocks |
|---|---|
| Part number | 25001-181 |
| UPC | 70000537837 |
| Position | Rear |
| Shock series | Performance Series |
| Lift range | 0-2 inch lift kits |
| Body style | 2 and 4-door models |
| Hydraulic / gas charged | Gas charged |
| Shaft | Large diameter, micro-polished |
| Hoses | Aeroquip high pressure, on remote reservoirs |
| Reservoir material | 6063 aluminum alloy |
| Fitment type | Direct fit |
| Sold as | Pair |
Vehicle fitment
It fits the 2007 to 2017 Jeep Wrangler JK in the 70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport, Sport S and X trims, plus the Unlimited version of each.
Wrangler TJ, LJ and JL models sit outside this fit. Verify model year, body style and trim before buying.
Installation notes
Installation is a bolt-on swap, and the rear kit is built for a 0 to 2 inch lift range, so settle your truck’s lift setup first. Route the remote reservoir hoses clear of moving suspension parts. Support the rear of the truck on stands before removing either shock.
What’s included
A pair of rear Performance Series shock absorbers with remote reservoirs and Aeroquip high pressure hoses.














