Overview
The King Shocks OEM Performance Series 25001-171 is a pair of rear gas-charged piggyback shocks for the 2005–2010 Ford F-250 and F-350 Super Duty. It bolts onto the factory suspension, and installation needs no cutting or welding.
Each shock has a 2.5-inch body with an external reservoir, which adds fluid capacity and heat dissipation to help the damping hold up under demanding use. The kit is built with the materials and tolerances used in high end race shocks. The shocks fit stock vehicles, and a custom length rod end is available for trucks with lifted aftermarket suspensions.
Key features
- Piggyback design with an external reservoir on a 2.5-inch shock body
- Gas-charged shock design
- Serviceable design that allows valve adjustments with simple hand tools
- Rear kits allow a 15% travel increase.
- Bolt-on installation with no cutting or welding.
- Built with the materials and precise tolerances King uses on its high end race shocks
- Custom length rod end option for vehicles running lifted aftermarket suspensions
- Sold as a pair
Heavy-duty rear shock care
Super Duty trucks carry heavier loads and tow more often, so rear shock fade is a real concern on steep grades. A piggyback reservoir keeps more damper fluid in play and can ease heat build-up over long hauls. Gas charge helps keep damping firm and steady when the shock is worked hard.
Mount bolts deserve a recheck after the first few trips with a loaded bed. If the truck sits lower on one side, check the springs and load balance before blaming the shock. Shocks rarely wear alone, so inspect spring seats, bushings and bump stops at the same time.
- Check mount bolts after the first trips
- Inspect bushings for cracks and play
- Watch for oil on the reservoir body
Specifications
| Brand | King Shocks |
|---|---|
| Part number | 25001-171 |
| UPC | 700005378226 |
| Product line | OEM Performance Series |
| Position | Rear |
| Reservoir type | Piggyback, external reservoir |
| Charge | Gas charged |
| Body diameter | 2.5 inch |
| Travel increase | 15% (rear kits) |
| Lift height | w/0 in. lift/drop |
| Fitment type | Direct fit |
| Sold as | Pair |
Vehicle fitment
It fits the 2005–2010 Ford F-250 Super Duty and 2005–2010 Ford F-350 Super Duty, in the Cabela’s, FX4, Harley-Davidson Edition, King Ranch, Lariat, XL and XLT trims.
Fit does not extend to Super Duty years outside 2005–2010 or to other Ford models. Confirm the year and trim for your truck before ordering.
Installation notes
The shocks bolt on with no cutting or welding, so the job is a bolt-on replacement. Trucks with a lift should use the custom length rod end option, since the standard kit is set for 0 in. lift/drop. Valve adjustments use simple hand tools. Support the truck safely on stands before working on the rear suspension.
What’s included
The kit is a pair of rear shocks, with the external reservoir and piggyback design built into each unit.












