Overview
The ARB 2895E is an Old Man Emu coil spring, part number 2895E, UPC 9319092023127. It is a separate part from the ARB 2895, so identify it by its own part number before buying.
The coil is designed for one make and model, with the vehicle’s load capacity and handling in view. Confirm the vehicle before ordering, because the match depends on it.
Key features
- Direct fit labeling without a named model
- Designed for one make and model
- Part number 2895E with UPC 9319092023127
Measuring before you swap
Measuring is the most useful step before a coil swap. Note the height at each corner on flat ground, and mark the position of the old spring and its upper seat. Photographs of the mounting are helpful when reassembling, since a spring that is rotated or seated incorrectly will change ride height and may cause rubbing. Keep the old spring until the new one has been confirmed.
Once the truck is lowered onto the new spring, recheck the heights on the same ground, then drive it a short distance and listen for knocks or rattles. Sway bar links and brake lines should be checked for stretch or contact. Alignment and headlight aim are the final checks, because the geometry changes when the spring changes.
Specifications
| Brand | ARB 4×4 Accessories (Old Man Emu) |
|---|---|
| Part number | 2895E |
| UPC | 9319092023127 |
| Type | Coil spring |
Vehicle fitment
Match the spring to your vehicle using its year, model and trim.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A coil spring replacement changes ride height and suspension angles, so check alignment and headlight aim afterwards. Confirm the fit and size against the spring you are removing before ordering.
Note the ride height before removing the old spring so the change can be checked afterwards.





