Overview
The Rancho RS7326 is a front RS7000MT monotube shock for 2007–2018 Jeep Wrangler (JK) models, in both 2-door and 4-door form. It fits the Wrangler JK and Wrangler Unlimited in the Rubicon, Sahara, Sport, Sport S, X, 70th Anniversary and 75th Anniversary trims. The lift height setting is w/0 – 2 in. Lift.
The gas charge and monotube design resist fade, and the velocity-sensitive damping responds to rough off-road terrain. The shock has a brushed-zinc clear coated finish, a 14mm chrome rod and black natural rubber bushings, and it is made in America.
Key features
- Gas-charged monotube design
- Ten stage velocity-sensitive valving, application specific
- Chrome 14mm rod
- Black natural rubber bushings
- Protective boot included
- Brushed-zinc clear coated finish
Lift height and front damping
Front shock length and damping need to match the lift on a Wrangler. A shock that is too short or too long for the suspension height can bottom out, limit articulation or put extra load on the mounts. Measuring the current front ride height before buying narrows the choice, and the lift range determines how far the shock is extended at rest.
Front shocks also work with bump stops, the track bar and the steering linkage, and a worn track bar can change how the front end feels even with new shocks. On trail use, a shock that resists fade helps the front axle keep control over repeated rough sections. Check the mounts and bushings during installation and look over the boot for tears after each trail day.
- Measure front ride height before ordering
- Check the track bar and steering linkage
- Inspect bump stops for wear
- Retorque mounts after the first few trail runs
Specifications
| Brand | Rancho |
|---|---|
| Part number | RS7326 |
| UPC | 39703003155 |
| Shock series | RS7000MT Series |
| Position | Front |
| Type | Monotube, gas charged |
| Body diameter | 1.97 inch (50mm) in diameter |
| Rod | 14mm chrome |
| Valving | Ten stage, velocity-sensitive |
| Bushings | Black natural rubber |
| Finish | Brushed-zinc clear coated |
| Lift height | w/0 – 2 in. Lift |
Vehicle fitment
It fits the 2007–2018 Jeep Wrangler (JK), covering 2-door and Unlimited 4-door models with the 70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport, Sport S and X trims.
Other Jeep generations, including the TJ, LJ and 2018 and newer JL Wrangler, and the Gladiator, are not covered. Match your year, model and trim to the coverage before ordering.
Installation notes
Gas-charged shocks are pressurized, so never open, cut or heat the body. Because the lift note reads 0 to 2 in., compare your current suspension height with it before choosing this shock.
What’s included
A protective boot is included. Check the package contents for mounting hardware before starting the installation.









