Overview
The KC HiLites 6 Inch SlimLite Fog Light, part number 127, is a 6-inch round black fog light with a 100-watt halogen bulb. It is a universal fit light with a stem mount and a 0 to 10 inch size range.
KC’s SlimLite housing is a 6-inch round design with a flat profile, so it fits where many other lights will not. Its optical quality glass lens, halogen bulb and polished reflectors give a focused beam for fog use.
Key features
- 100 watt halogen bulb
- Black housing
- Clear lens with a focused fog beam
- Stem mount for universal installation
- Sized 0 to 10 inches
Fog light beam and aim
A fog light works best when it is aimed low, so the beam lights the road surface just ahead of the bumper rather than the air above it. A focused pattern cuts through fog and spray, but it can also throw glare into the eyes of oncoming drivers if the aim is too high. Set the aim on level ground with the vehicle loaded the way it is normally driven.
Stem mounts are simple to fit and adjust, but they are only as stable as the bracket and the surface they attach to. Tighten the fasteners after the first few drives, and check that the stem does not rub against the bumper or grille. A loose mount lets the beam drift, so recheck the aim whenever the light is bumped or removed.
Halogen bulbs run hot and use more current than LED lights. Keep the wiring protected from heat and road debris, and inspect the connector for corrosion once a season. If the beam turns yellow or dims, the bulb or lens may be worn and should be checked before the next trip.
Specifications
| Brand | KC HiLites |
|---|---|
| Part number | 127 |
| UPC | 84709001278 |
| Size | 6-inch round, 0 to 10 inch range |
| Light type | Halogen, 100 watts |
| Lens | Clear |
| Color | Black |
| Beam | Fog |
| Mounting | Stem |
| Type | Fog light |
Vehicle fitment
Universal fit. The mounting spot and the beam aim decide where the light ends up.
Check the stem mount and the bumper opening before ordering, since the light is not tied to a specific vehicle.
Installation notes
Use a fused relay for the 100-watt halogen bulb and a switch that suits the current draw. Aim the light low and level once it is mounted.
What’s included
The kit is the fog light with its stem mount, and it does not include wiring or a stone guard.









