Overview
The JcrOffroad Crusader Rock Sliders with LED Rock Lights, part number JKSL-CRL4D-B, are bare steel rocker guards for the Jeep Wrangler JK Unlimited from 2007 to 2016. JcrOffroad says they combine a trail-proven rock slider, a usable step and built-in off-road rock lights in one package.
The sliders are cut and formed from 3/16 inch steel and hand built in the USA. They mount to the lower body mounts and an additional 18 body attachment points, and the LED rock lights come with the kit.
Key features
- Built-in LED rock lights, included with the kit
- Usable step along the rocker panel
- Built-in Hi-Lift jacking points front and rear
- Formed from 3/16 inch steel
- Mounts to the lower body mounts plus 18 additional body attachment points
- Hand built in the USA
Before you install
Rock sliders take the hits from rocks, stumps and ledges that would otherwise reach the rocker panels and body mounts. On a Wrangler Unlimited used for trail work, the slider is often the first part to touch an obstacle on a tight line, so how it attaches to the body matters as much as its profile. Bare steel shows scrapes and surface rust over time, so a protective coat after fitting is a practical step for longer life.
Before cutting, check where the body attachment points sit on your own Jeep and whether brake lines, fuel lines or factory brackets run near the drill locations. Hold each slider in place and mark every hole first, then confirm clearance on both sides. Running the LED lights through a fuse keeps the wiring protected if the sliders take a hard hit.
- Recheck bolts and body attachments after the first few trail runs
- Look for bent standoffs or cracked welds after hard impacts
- Keep the step area clear of mud for easier entry and exit
Specifications
| Brand | JcrOffroad |
|---|---|
| Part number | JKSL-CRL4D-B |
| UPC | 700007583201 |
| Material | 3/16 inch steel |
| Finish | Bare steel |
| Type | Formed plate guard with standoff |
| Lighting | Built-in LED rock lights, included |
| Jacking points | Hi-Lift jacking points, front and rear |
| Mounting | Lower body mounts plus 18 additional body attachment points |
| Included | Mounting hardware, LED rock lights, JcrOffroad sticker |
| Quantity | Supplied as a pair |
| Installation | Cutting or drilling required |
Vehicle fitment
The manufacturer fitment list covers the 2007 to 2016 Jeep Wrangler (JK) Unlimited, including the 70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport, Sport S and X trims.
It fits 2007 to 2016 Jeep Wrangler JK Unlimited models, including the 70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport, Sport S and X trims. Newer JL and older LJ, TJ and YJ generations are outside this fit. Confirm fit for your vehicle’s year, model and trim before ordering, especially for two-door Wrangler JK models.
Installation notes
Mounting requires cutting or drilling. Plan the attachment points before starting, since the kit uses the lower body mounts together with 18 additional body attachment points.
The LED lights are built in. Wire them through a fuse, and check local rules on auxiliary lighting before road use.
What’s included
The kit includes the sliders with built-in LED rock lights, mounting hardware and a JcrOffroad sticker, supplied as a pair.


























