Overview
The JcrOffroad Classic Rock Sliders in bare steel, part number WKSL-CL-BARE, are tubular rocker guards for the Jeep Grand Cherokee. The manufacturer fitment list covers the 2005 Grand Cherokee WJ in Laredo and Limited trims, and the 2006 to 2010 Grand Cherokee WK in 65th Anniversary Edition, Laredo, Limited, Overland and SRT8 trims.
The Classic sliders fit short arm suspensions without modification, and they also fit Rough Country, Iron Rock and Clayton long arm setups. Other suspensions with brackets on the outside of the uniframe, or mounts on the pinch seam, may need modifications.
Key features
- Cut and formed from 3 x 2 x 3/16 inch box tubing
- 1-3/4 inch angled round outer tubing
- Attaches with 13 bolts per side
- Fits short arm suspensions with no modification needed
- Includes mounting hardware
- Made in the U.S.A.
Short arm and long arm setups
Suspension geometry decides how a tubular slider fits. Short arm setups usually leave more room between the frame and the rocker, while long arm kits move brackets and mounts that can reach the slider’s attachment area. Before ordering or drilling, measure where your control arm brackets sit and how close they come to the outside of the uniframe.
Bare steel tubing has no factory coating, so it will rust sooner than painted parts if left exposed. Once fitted, a light coat of paint or a rust inhibitor on the bolt holes helps. Check all 13 bolt points periodically, since loosening under trail vibration is common on any slider.
- Measure control arm bracket positions first
- Retighten bolts after the first few trail runs
- Keep a spare set of fasteners in the vehicle
Specifications
| Brand | JcrOffroad |
|---|---|
| Part number | WKSL-CL-BARE |
| UPC | 70000777758 |
| Finish | Bare steel |
| Type | Tubular guard |
| Main tube | 3 x 2 x 3/16 inch box tubing |
| Outer tubing | 1-3/4 inch angled round |
| Attachment | 13 bolts per side |
| Included | Mounting hardware |
| Installation | Cutting or drilling required |
| Origin | Made in the U.S.A. |
Vehicle fitment
The manufacturer fitment list includes the 2005 Jeep Grand Cherokee (WJ) in Laredo and Limited trims, and the 2006 to 2010 Jeep Grand Cherokee (WK) in 65th Anniversary Edition, Laredo, Limited, Overland and SRT8 trims.
Other Grand Cherokee years, including the 1999 to 2004 WJ, are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Mounting requires cutting or drilling, and the sliders attach with 13 bolts per side. Other suspensions may need modifications, so review your suspension design before fitting.
What’s included
The sliders come with mounting hardware. They have no paint or powder coat finish, since they are bare steel.














