Overview
The JcrOffroad Crusader Rock Sliders in black, part number SWBSL-CRLJS-P, are fully tub mounted rocker guards for stretched models. JcrOffroad describes them as a mini boat side style slider with higher ground clearance than traditional angle steel tube sliders.
The two-piece design works as a step on a lifted Wrangler, and the steps are 3.5 inches wide. The sliders are cut and formed from 3/16 inch steel with a black powder coat finish, and they give wheel well to wheel well coverage.
Key features
- Fully tub mounted, with maximum underbody coverage
- Interior side bracing brackets included
- Built-in Hi-Lift jacking points front and rear
- Wheel well to wheel well coverage
- Cut and formed from 3/16 inch steel
- Two-piece design with 3.5-inch-wide steps
Fitting a tub-mounted slider
A tub-mounted slider attaches to the body structure instead of only the outer rocker, so the load path runs into the tub. That design gives broad underbody coverage but also means the mounting points need to be planned carefully. Marking holes from the bracket positions before cutting prevents drilling into wiring or fuel lines hidden behind the panel.
Stretched bodies have different tub geometry than standard models, so fit should be checked at several points before the final bolts go in. Support the slider while starting the fasteners, then tighten in a steady pattern. Road grime collects in the gap between the slider and the tub, so inspect that area each season.
- Mark holes from bracket positions before cutting
- Check wiring and fuel lines behind the panel
- Tighten fasteners in a steady pattern
Specifications
| Brand | JcrOffroad |
|---|---|
| Part number | SWBSL-CRLJS-P |
| UPC | 700007583311 |
| Model type | Stretched models |
| Material | 3/16 inch steel |
| Finish | Black powder coat |
| Type | Formed plate guard with standoff |
| Mounting | Fully tub mounted |
| Step width | 3.5 inches |
| Jacking points | Built-in Hi-Lift, front and rear |
| Included | Interior side bracing brackets, mounting hardware, JcrOffroad sticker |
| Installation | Cutting or drilling required |
Vehicle fitment
This is designed for stretched models and a lifted Wrangler. Fit for a specific vehicle needs a model year and chassis code to confirm.
Compare the year, model and trim of your own vehicle before buying. Compare the mounting points with your tub before cutting.
Installation notes
Cutting or drilling is needed, and the fully tub mounted design relies on the interior side bracing brackets. Plan the interior and exterior mounting points together before fitting.
What’s included
Interior side bracing brackets, mounting hardware and a JcrOffroad sticker come with the sliders.




















