Overview
The JcrOffroad Classic Rock Sliders, part number WJSL-CL-PC, are black powder-coated tubular rock sliders for the 1999–2004 Jeep Grand Cherokee (WJ). Rock sliders, also called side guards, mount along the lower body between the wheels to protect the rocker area from rocks and trail obstacles. The Classic design has been produced for over 10 years.
The Classic sliders are built for hard off-road use. The main tube is 3 inch by 2 inch boxed tubing with a .188 inch wall. The angled side tubing gives side clearance and protection and can also be used as a step. The sliders bolt to the pinch seam and attach to the main uniframe, so the guard shares load with the frame.
Key features
- Black powder coat finish
- Main tube of 3 inch by 2 inch boxed tubing with a .188 inch wall
- Side tubing of 1.75 inch by .125 inch wall, angled for side clearance
- Angled side tubing that can also be used as a step
- Mounted with 13 bolts per side: 5 to the pinch seam and 8 to the main uniframe
- Tubular guard with tubular standoff design
- Made in the U.S.A.
- It works with Clayton Offroad, Iron Rock and Rough Country long arm kits.
Long arm kits and mounting prep
Rock sliders on a Grand Cherokee WJ often share space with the suspension, especially when a long arm kit changes where the control arms and brackets sit. Before drilling, look at how the arms line up with the uniframe and pinch seam so the guard does not interfere with arm travel. A slider that clears at rest may rub once the suspension articulates on rough trails.
Plan the mounting order carefully. Start with the bolts that hold the guard to the main uniframe, then install the pinch seam bolts so the load is shared evenly. Support the vehicle securely while drilling, and clean the holes before tightening. Tubular sliders also need periodic checks at the standoffs, where corrosion tends to collect.
- Check arm clearance at full articulation
- Tighten each bolt evenly across the mount
- Inspect standoffs after mud and water crossings
Specifications
| Brand | JcrOffroad |
|---|---|
| Part number | WJSL-CL-PC |
| UPC | 700007277911 |
| Finish | Black powder coat |
| Type | Tubular guard with tubular standoff |
| Main tube | 3 inch by 2 inch boxed tubing, .188 inch wall |
| Side tubing | 1.75 inch by .125 inch wall |
| Mounting | 5 bolts to the pinch seam and 8 bolts to the main uniframe, 13 bolts per side |
| Installation type | Cutting or drilling required |
| Fitment | Direct fit |
| Country of origin | Made in the U.S.A. |
Vehicle fitment
The manufacturer fitment list covers the 1999–2004 Jeep Grand Cherokee (WJ), including the Laredo, Limited, Overland, Special Edition and Sport trims.
This fitment does not cover other Grand Cherokee generations, such as the ZJ. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Cutting or drilling is required, so the mounting points must be prepared before the sliders are fitted. Plan for 5 bolts per side at the pinch seam and 8 more into the main uniframe, 13 bolts per side in total. Work carefully around the frame and rocker area, and support the vehicle safely while drilling.
What’s included
Confirm the brackets and hardware included with your order before installing.


















