Overview
The JcrOffroad Adventure Tire Carrier, part number XJAC-PC, is a black powder-coated rear tire carrier for the 1984–2001 Jeep Cherokee (XJ). It bolts to the JcrOffroad Vanguard rear bumper and holds a tire up to 37 inch.
The carrier is built for expedition use. It is CNC cut and formed in the USA from 3/16 inch plate and swings on a Bomb-Proof spindle. It has a slam-closed latching assembly, a self-locking plunger and a stainless track to slide on. JcrOffroad backs the carrier with a lifetime guarantee.
Key features
- Two-way adjustable mount for height and backspacing
- Accommodates tires up to 37 inch
- Slam-closed latching assembly with self-locking plunger
- Stainless track for the carrier to slide on
- Optional RotoPax carrying with additional mounts, sold separately
- License plate relocation bracket and LED illumination light included
- Made in the U.S.A. from 3/16 inch steel
Expedition carrier setup
A rear carrier moves a tire and its load to the back of the vehicle, so the bumper, body mounts and latch all share that weight. Expedition setups often add fuel, water or recovery gear, and each addition changes how the carrier sits over rough ground. Plan the total load before mounting the tire.
The latch and track should move freely and close with a firm stop. A worn plunger or track lets the carrier shift, so check the latching hardware after each trip. Stainless track surfaces are less likely to corrode, but they still need cleaning after salt or mud exposure.
- Check the latch and self-locking plunger for wear
- Tighten bumper mounting bolts after rough trails
- Clean the track after mud, sand or salt exposure
- Adjust height and backspacing to suit the tire and wheel
Specifications
| Brand | JcrOffroad |
|---|---|
| Part number | XJAC-PC |
| UPC | 780456972211 |
| Finish | Black powder coat |
| Material | 3/16 inch steel plate |
| Construction | CNC cut and CNC formed |
| Location | Bumper mount |
| Maximum tire size | 37 inch |
| Mount adjustment | Two-way: height and backspacing |
| Accessory mounts | RotoPax carrying with additional mounts (sold separately) |
| Warranty | Lifetime guarantee from JcrOffroad. |
| Fitment | Direct fit |
Vehicle fitment
It fits the 1984–2001 Jeep Cherokee (XJ) in the Base, Briarwood, Chief, Classic, Country, Laredo, Limited, Pioneer, SE and Sport trims. It works only with the JCR Vanguard rear bumper.
Cherokees outside the 1984–2001 XJ range, such as the Liberty (KJ) and Grand Cherokee models, are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The carrier bolts on to the JcrOffroad Vanguard rear bumper, and it only works with that bumper. Check that bumper before fitting the carrier. Additional mounts are needed to carry RotoPax, and they are sold separately.
What’s included
The carrier includes a license plate relocation bracket and an LED illumination light.
Not included: The JCR Vanguard rear bumper, which the carrier requires, and additional RotoPax mounts, sold separately.
























