Overview
The JcrOffroad Rear Bumper Tire Carrier, part number SWBAC-PC-YJ, is a rear bumper tire carrier for the Jeep Wrangler TJ/YJ or CJ7. It is built for expedition use and for carrying extra fuel, water and gear.
It bolts onto either JCR Vanguard or Crusader rear bumpers and accommodates tires up to 40 inch, with a two-way adjustable mount for tire height and wheel backspacing.
Key features
- Two-way adjustable tire mount for tire height and wheel backspacing
- Accommodates tires up to 40 inch
- Bolts onto JCR Vanguard or Crusader rear bumpers
- Features a JcrOffroad bomb-proof spindle
- Easy bolt-on installation with mounting hardware included
- Black powder coat finish over 3/16 inch steel
Carrying spare tires safely
A rear-mounted spare changes how a vehicle handles, so the mounting point matters as much as the carrier itself. Weight sitting behind the rear axle shifts the balance on climbs, descents and off-camber sections, and it adds load to the bumper and the frame rail behind it. Before a trip, load the carrier with the spare and any extra cans, then check that the bumper bolts and carrier hardware are snug. Recheck them after the first few miles of washboard or trail, since vibration loosens fasteners over time.
Tire height and backspacing also affect how the spare sits. Set the two-way mount so the tire clears the body and the swing of the rear door or tailgate is not blocked. Keep the tire secured with its lock or strap so it cannot shift in rough terrain. Inspect the carrier welds and powder coat for cracks or chips after hard use, and touch up bare steel to limit rust.
- Check torque on bumper and carrier bolts after the first trips
- Confirm the tire clears the body at full articulation
- Keep fuel and water cans strapped and balanced
Specifications
| Brand | JcrOffroad |
|---|---|
| Part number | SWBAC-PC-YJ |
| UPC | 70000777736 |
| Mounting location | Bumper mount |
| Tire capacity | Up to 40 inch tire |
| Tire mount adjustment | Two-way, for tire height and wheel backspacing |
| Material | 3/16 inch steel |
| Finish | Black powder coat |
| Made in | U.S.A. |
| Fitment listed | Direct fit |
Vehicle fitment
It is a direct fit for the Jeep Wrangler TJ/YJ or CJ7.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The carrier is a bolt-on unit with mounting hardware included. Set the tire height and wheel backspacing with the two-way mount before you use the carrier.
What’s included
Mounting hardware is included.
Not included: the rear bumper, since the carrier bolts onto a JCR Vanguard or Crusader rear bumper, and the tire itself.














