Overview
The ICON Vehicle Specific 2.0 Aluminum Series Rear Shock, part number ICO56515, is a rear monotube shock for 2005–2023 Toyota Tacoma 4WD models. It is rated for lifts of up to 3 inches and is nitrogen charged with an internal reservoir.
ICON says its engineers tailor each 2.0 Aluminum Series shock to the application, and the shock is aimed at everyday street drivers and weekend off-road users who want better performance on and off the road. Every unit can be rebuilt and revalved. For extreme off-road use, ICON points to its 2.5 Series, which it says is built to handle more abuse.
ICON says its engineers tailor the 2.0 Aluminum Series to each application, and this rear shock is aimed at drivers who want better performance on and off the road. Each shock can be rebuilt and revalved, which allows the damping to be changed as the truck or the driving changes.
The body and reservoir tubing are 6063 anodized aluminum, which ICON says spreads heat well and resists corrosion. For extreme off-road use, the company points to its 2.5 Series, which it describes as built to handle more abuse.
The shock is rated for lifts of up to 3 inches, so owners running a taller setup should check whether the 2.5 Series is the better match for their truck.
Key features
- Premium grade 5WT shock oil for damping that holds across a wide temperature range.
- One-piece linear and digressive piston with vehicle-specific valving.
- Nitrogen charged monotube with an internal reservoir.
- 5/8 inch chrome plated hardened steel shaft, which ICON says resists corrosion and pitting.
- 6061 aluminum rod end, top cap and internals, with polyurethane bushings and zinc plated sleeves.
- Nitrile rubber top-out bumper for quiet operation.
Choosing valving for your use
Shock valving controls how quickly the damper resists compression and rebound. A rear shock tuned for a truck that carries gear or towing loads behaves differently from one set up for light trail work, so think about how the truck is used most of the time before choosing a rebuild.
Because this shock can be rebuilt and revalved, its damping can be adjusted later as tire size, load or driving style changes. Keep the shaft clean and inspect the seals during regular service, since leaks or a bouncing rear end are common signs the shock is worn and due for rebuild.
- Match the rating to your lift height before ordering
- Inspect the seals and shaft at each tire rotation
- Replace bushings when the shock is rebuilt
Specifications
| Brand | ICON Vehicle Dynamics |
|---|---|
| Part number | ICO56515 |
| Shock series | 2.0 Aluminum Series |
| Position | Rear |
| Shock type | Monotube with internal reservoir |
| Lift rating | Up to 3 in |
| Shaft | 5/8 in chrome plated hardened steel |
| Body | 6063 anodized aluminum |
| Damping | Hydraulic |
| Charge | Gas charged |
Vehicle fitment
It fits the 2005–2023 Toyota Tacoma across its trim range, including Pre Runner, SR5, TRD Off-Road, TRD Pro, TRD Sport and X-Runner. It is not made for the Tundra or 4Runner.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
One rear shock. Check the package contents against your installation before starting.

