Overview
The ICON V.S. 2.5 Series Remote Reservoir Shock Set, part number ICO217810P, is a front monotube reservoir set for Dodge Ram 2500 and 3500 trucks. It fits 2003–2010 models, plus 2011–2013 Ram 2500 and 2011–2012 Ram 3500 trucks.
The set uses a billet aluminum manifold to form a bump zone, which ICON says adds about 20% more damping force. That is intended to keep the suspension from bottoming harshly and to control it when it compresses at high speed. Each shock is configured in length and damping tune for its application, and it can be rebuilt and revalved.
For owners who want a more user-defined tune, ICON points to its Compression Damping Control Valve (CDCV) and OMEGA Series bypass shocks.
The set is a monotube reservoir shock with a gas charge. A billet aluminum manifold a few inches below the top cap forms the bump zone, which adds about 20% more damping force. Each shock is configured for its application in length and damping tune.
Front shocks on a Ram 2500 or 3500 carry significant load, so the fitment should be checked against the year and body style on your truck before ordering this set.
Key features
- Monotube reservoir design with a gas charge.
- Bump zone with about 20% extra damping force.
- Billet aluminum manifold forms the bump zone.
- Configured for each application in length and damping tune.
- Rebuildable and revalveable.
Front shocks on heavy-duty trucks
Front shocks on a heavy-duty pickup handle the weight of the front axle, the engine and any plow or trailer tongue weight. Front damping controls how the truck settles after bumps and how it reacts to steering inputs at highway speed. A monotube design with a reservoir often suits trucks that see repeated heavy use, because it manages heat and oil flow during extended work.
Look for signs of wear in the front end, including oil on the shock body, clunking over small bumps, and steering that feels loose on center. Front shocks are commonly replaced in pairs so the two sides respond the same way. Ball joints, tie rod ends and upper mounts are often checked during the same job, since play in those parts changes how the damping works.
- Check both sides for matching feel
- Inspect upper mounts for cracks
- Look for play in ball joints and tie rod ends
Specifications
| Brand | ICON Vehicle Dynamics |
|---|---|
| Part number | ICO217810P |
| Shock series | 2.5 Remote Reservoir |
| Position | Front |
| Shock type | Monotube reservoir |
| Bump zone damping increase | About 20% |
| Damping | Hydraulic |
| Charge | Gas charged |
Vehicle fitment
It fits the 2003–2010 Dodge Ram 2500 and 3500, the 2011–2013 Ram 2500 and the 2011–2012 Ram 3500 across their trim levels. Confirm fit for your model year and body style before ordering.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
Front shock set. Check the included parts and mounting hardware against your installation before starting.