Overview
The ICON Vehicle Dynamics ICO56516 is a rear 2.0 VS IR shock absorber for the 2022 Toyota Tundra, built from the 2.0 Aluminum Series. It is a nitrogen charged monotube shock with an internal reservoir, and it is compatible with up to 1 inch of rear lift.
The Vehicle Specific 2.0 Aluminum Series is an upgrade option for street and off-road use. The shock uses vehicle-specific valving with a one-piece linear and digressive piston, tuned for ride quality on and off the road. The body and reservoir tubing are 6063 anodized aluminum for heat dissipation and corrosion resistance. For heavier use, the 2.5 Series is the alternative to consider. The shock is sold individually and is a direct fit for the rear position.
Key features
- Premium 5WT shock oil for steady damping across a wide temperature range
- Nitrogen charged monotube with an internal reservoir
- One-piece linear and digressive piston with vehicle-specific valving
- 5/8-inch chrome plated hardened steel shaft
- 6061 aluminum rod end, top cap and internals
- 6063 anodized aluminum body and reservoir tubing
- Polyurethane bushings and zinc plated sleeves for OE-type fitment
- Nitrile rubber top out bumper for quiet operation
- Fully rebuildable and re-tunable
Rear lift and ride height
Rear shocks control how the axle moves over bumps and under braking, so their rating for rear lift matters. A shock sized for a stock or near-stock height keeps the suspension geometry close to the original design. Raising the rear beyond the rated range can change shock travel, bump stop contact and the way the truck carries load.
Rear shocks are often replaced in pairs so both sides damp the same way. When changing rear shocks, check the rubber bushings and mounting hardware, since worn parts can make a new shock feel loose. If the truck carries heavy loads, consider how the springs and bump stops will work with the shock rather than focusing only on the shock itself.
- Confirm rear lift before ordering
- Replace rear shocks in pairs
- Inspect bushings and hardware at install
Specifications
| Brand | ICON Vehicle Dynamics |
|---|---|
| Part number | ICO56516 |
| Shock series | 2.0 Aluminum Series |
| Shock type | Monotube |
| Body diameter | 2.0 inches |
| Shaft | 5/8-inch chrome plated hardened steel |
| Top mount | Stem top |
| Bottom mount | Eyelet |
| Location | Rear |
| Rear lift compatibility | 0 to 1 inch |
| Hydraulic or gas charged | Gas charged |
| Fitment type | Direct fit |
| Vehicle | Toyota Tundra, 2022 |
Vehicle fitment
It fits the 2022 Toyota Tundra in the 1794 Edition, Capstone, Limited, Platinum, SR and SR5 trims.
The shock is not compatible with Tundras equipped with Adaptive Variable Suspension. Other Tundra model years are not on the list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
It is compatible with 0 to 1 inch of rear lift. Larger rear lift heights fall outside that rating, so check the rear lift on your truck before choosing it.
What’s included
The shock is sold individually. Confirm the number needed for both rear positions before ordering.
