Overview
The ICON V.S. 2.5 Series Piggyback Rear Shock Kit, part number ICO57720P, is a rear shock kit for 2007–2021 Toyota Tundra trucks, including the 1794 Edition, Limited, Nightshade, Platinum, SR5, TRD Pro and Trail. The shock is a hydraulic piggyback reservoir design with a gas charge.
The billet aluminum manifold sits a few inches below the top cap and creates a bump zone. The zone adds about 20% more damping force, which keeps the Tundra’s rear suspension from bottoming harshly and controls the shock when it compresses quickly. The shock is configured for the truck in length and damping tune, and it can be rebuilt and revalved.
The bump zone is formed by the billet aluminum manifold a few inches below the top cap. It adds about 20% more damping force, which helps prevent harsh bottom-outs and keeps the suspension controlled on quick compression. The kit is configured for the Tundra in length and damping tune.
The shock is a hydraulic piggyback reservoir design with a gas charge. Confirm the rear mounts and your truck’s trim before ordering.
Key features
- Billet aluminum manifold forms the bump zone.
- About 20% extra damping force in the bump zone.
- Controls rapid compression and limits harsh bottom-outs.
- Configured for the Tundra in length and damping tune.
- Rebuildable and revalveable.
Trail use and wear
Piggyback reservoir shocks separate the gas and oil reservoir from the main body, which helps the damper keep working during long off-road runs. On a pickup, the rear suspension carries the bed load and takes most of the bump-stop impacts on rough trails, so the damper sees heavy use. Heat management and consistent damping matter more when the truck is climbing, descending or crossing washouts.
Watch for oil on the shock body, a hose or reservoir that rubs against the frame, and bushings with play. Shocks that make noise, bounce after a bump or feel uneven side to side should be inspected. Rebuilding with fresh seals and a revalved tune is often more practical than replacing a sound body when the feel changes over time.
- Check reservoir hose routing after each trail trip
- Listen for knocking from the rear mounts
- Keep the shaft clean of mud
Specifications
| Brand | ICON Vehicle Dynamics |
|---|---|
| Part number | ICO57720P |
| Shock series | 2.5 Piggyback Reservoir |
| Position | Rear |
| Shock type | Reservoir |
| Bump zone damping increase | About 20% |
| Damping | Hydraulic |
| Charge | Gas charged |
Vehicle fitment
It fits 2007–2021 Toyota Tundra models across the trim range. Tacoma, 4Runner and 2022 Tundra models do not fit.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
A rear shock kit. Test the mounts for fit before final tightening.
