Overview
The Fox 985-24-069 is a Fox 2.0 Performance Series smooth body IFP shock, with IFP meaning internal floating piston. It is made for 2012-2016 Ford Ranger (T5) trucks. The body is aluminum, with an extended length of 24.750 in., a collapsed length of 15.650 in. and a stroke of 9.100 in.
A smooth body shock has no external reservoir, so the damper is a single tube unit. The internal floating piston sits inside the body and separates the oil from the gas charge. Owners comparing this shock with their current unit should check the extended and collapsed lengths, since the 9.100 in. stroke sets how far the shock can travel.
Key features
- Smooth body design with internal floating piston (IFP)
- Aluminum body
- Extended length 24.750 in.
- Collapsed length 15.650 in. and stroke 9.100 in.
- Stated use: 2012-2016 Ford Ranger (T5)
Choosing an IFP shock
An internal floating piston keeps the oil and gas apart inside a single tube body, so the shock can be gas charged without a separate canister. Because there is no reservoir hose, the layout is simpler to route and less exposed to rock strikes. Heat still builds during long descents, and a shock that stays sealed tends to keep its damping steady.
When a truck carries a heavier load or larger tires, the shock is often replaced along with the springs or upper mounts. Check the mount bushings, bump stops and spring seats for wear before installing a new unit. Clean the shaft and seal area each time you check the truck, since grit around the seal is one of the most common causes of early oil leaks.
- Look for oil streaks along the body
- Check the bushing eyes for cracking
- Inspect the bump stops for compression damage
Specifications
| Brand | Fox Racing Shox |
|---|---|
| Part number | 985-24-069 |
| UPC | 700006894661 |
| Series | 2.0 Performance Series |
| Body style | Smooth body |
| Body material | Aluminum |
| Extended length | 24.750 in. |
| Collapsed length | 15.650 in. |
| Stroke | 9.100 in. |
| Stated application | 2012-2016 Ford Ranger (T5) |
Vehicle fitment
It is for 2012-2016 Ford Ranger (T5) trucks, the only application named for this shock. Measure your current shock’s extended and collapsed lengths and compare them with the figures above before ordering.
Ford Ranger model years outside 2012-2016 are not covered for this shock. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Check the collapsed length first, since a mismatch with the mounts can restrict travel or strain the suspension.
What’s included
Confirm the mounting hardware you need is on hand before installing the shock.









