Overview
The Icon Suspension 58651-CB is a 6 to 7 inch front 2.5 VS Series coilover shock kit made to replace the Pro Comp 6 inch shocks on a lifted Toyota truck. It is a bolt-on upgrade that replaces the supplied top load spacer and factory shock combination with a 2.5 inch diameter fine tuned race style coilover.
The kit is built around the Pro Comp drop down brackets. The coilovers are intended to improve ride quality, enhance performance and sharpen handling on a lifted Tundra. Confirm the fitment details below before choosing this kit for your truck.
Key features
- 2.5 inch diameter fine tuned race style coilover body
- Built around Pro Comp drop down brackets
- Replaces the supplied top load spacer and factory shock combination
- Gas charged shock design
- Front coilover kit sold as a pair
- All required hardware included
- Intended to improve ride quality and handling on a lifted truck
Lift components and alignment
A coilover swap works best when the lift components match the design around it. Drop down brackets, spacers and the shock body all shape ride height and the angle of the lower control arm, so a mismatch can change how the front end steers and wears. Check that the lift parts are complete and seated before the new shocks go on.
Front alignment is often the last step and the one most often skipped. A change in shock length or lift height moves caster and camber, which can cause pull or uneven tire wear. Plan an alignment after the install, and watch the front tires during the first few weeks of driving.
- Check drop down bracket bolts for proper torque
- Inspect the stock bump stops for wear
- Look for rubbing at full compression
Specifications
| Brand | Icon Suspension |
|---|---|
| Part number | 58651-CB |
| UPC | 700006854931 |
| Series | 2.5 VS Series coilover |
| Shock diameter | 2.5 inch |
| Lift range | 6 to 7 inch |
| Shock type | Gas charged |
| Position | Front |
| Replaces | Pro Comp 6 inch shocks |
| Quantity | Sold as a pair |
Vehicle fitment
The fit covers the 2007 to 2015 Toyota Tacoma, including Base, Pre Runner, TRD Pro and X-Runner trims. The kit is designed for a truck with a Pro Comp 6 inch lift installed, so match the lift before fitting.
Tundra models, including 2007 and newer with a Pro Comp 6 inch lift, are not covered by this kit’s fit. Other Toyota generations and models are not covered either. Verify the year, model and trim against your truck before ordering.
Installation notes
Icon describes these shocks as bolt-on, and all required hardware is included. Because the kit is designed around the Pro Comp drop down brackets, the lift components must match that setup. After any coilover change, have the front alignment checked.
What’s included
Front coilover shocks and all required hardware, sold as a pair.
Not included: The Pro Comp 6 inch lift kit and its drop down brackets must already be installed on the truck. The shocks are designed to work with that lift, which is not part of this kit.






