Overview
The Icon Suspension K53132 is a Stage 2 suspension system for the 1996-2002 Toyota 4Runner. It combines adjustable coilover shocks, rated for 0 to 3 inches of lift, with a tubular steel upper control arm kit. It fits the 4Runner base, Limited and SR5 models of those years.
The system is designed to improve on and off road handling over stock. It uses 2.5 VS Series coilovers and 2.0 Aluminum Series rear shocks, tuned with engineered coil springs and vehicle specific valving.
Key features
- Adjustable coilovers from 0 to 3 inches of lift height
- Tubular steel upper control arm with 1 inch PTFE-lined stainless uniballs
- Greasable bushings on the upper control arm
- Front and rear shocks are tuned specifically for this vehicle.
- Shocks are fully rebuildable and revalveable
- Corrosion resistant CAD plated coilover shock body with a 7/8 inch shaft
- FK rod end bearings for longevity and minimal deflection
- CNC machined 6061 aircraft grade aluminum components
- The system is designed to reduce body roll compared with stock.
Ride height and travel
Adjustable coilovers let you set ride height inside the rated range, which is useful when weight changes or when tire size shifts. The ability to rebuild and revalve the shocks means they can be tuned over time rather than replaced whole. Many owners keep a record of their setting so they can return to it after service.
Upper control arms with uniballs handle the geometry at the top of the axle, so the joints should be checked for play during service. Greasable bushings need periodic lubrication to keep them moving freely. After any ride height change, check the alignment and driveline angles, because the geometry shifts with the arm and coilover settings.
- Log the coilover setting before any adjustment
- Grease the upper control arm bushings at service intervals
- Recheck alignment after changing ride height
Specifications
| Brand | Icon Suspension |
|---|---|
| Part number | K53132 |
| UPC | 70000750571 |
| Lift height range | 0 to 3 inches, adjustable |
| Front shock body | CAD plated, 7/8 inch shaft |
| Upper control arm | Tubular steel, 1 inch PTFE-lined stainless uniballs |
| Wheel fit | 8 inch wide wheel with 5 inch backspace |
| Tire fit | 33 x 11.50 inch; larger tires may need fender trimming |
| Made in | United States |
The system is bolt-on, and its shocks are fully serviceable, so they can be rebuilt or revalved as needed for a long service life. The rear shocks are 2.0 Aluminum Series units with engineered coil springs.
Vehicle fitment
It fits the 1996-2002 Toyota 4Runner base, Limited and SR5 models. This is the 3rd generation 4Runner, covering the same model years.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The upper control arm kit includes alignment correction, so a wheel alignment is needed after installation. Check the driveline angles at the new ride height.
What’s included
Included: adjustable coilover front shocks, rear shocks with ICON engineered coil springs, and the tubular steel upper control arm kit.






