Overview
The ARB Old Man Emu BP-51 Internal Bypass Shock, part number BP5160026, is a rear reservoir shock for the Toyota Land Cruiser. It fits the 2008–2011 and 2013–2020 Land Cruiser in the Base and Heritage Edition trims.
This shock is the BP-51 design ARB developed with its Old Man Emu ride engineers. Its rebound and compression can be adjusted separately while it is on the vehicle, which lets the setting be matched to the vehicle’s load or to the type of trip.
The year range decides fit for this shock. It fits 2008–2011 and 2013–2020 models, so a 2012 Land Cruiser is outside that range. The BP5160015 is for 1990–1997 vehicles, so the two part numbers are not interchangeable. Confirm your vehicle’s year and trim against the part number before ordering.
Key features
- Rear shock in the Old Man Emu BP-51 range
- Separate on-vehicle adjustment of rebound and compression
- Reservoir design with a gas-charged body
- Stem top and eyelet mounts
Ride height and shock wear
A rear shock controls body movement over bumps and under load, so a worn unit often shows up as bouncing, nose dive on braking or a rear end that feels loose. Reservoir shocks handle heat better than body-only designs, which helps on long descents and sustained use. Inspect for oil seepage around the seals, dents in the body and any noise from the mounts.
When adjusting rebound and compression, make small changes and note each setting so you can return to a known baseline. Stiffer settings suit loaded trips, while softer settings suit light loads on rough roads. Replace the bump stops and bushings if they show cracking, since they affect how the shock works at the end of its travel.
- Look for oil on the shock body
- Check mounts for play
- Note settings before changing them
- Replace worn bump stops
Specifications
| Brand | ARB 4×4 Accessories |
|---|---|
| Part number | BP5160026 |
| Shock series | Old Man Emu BP-51 |
| Location | Rear |
| Shock type | Reservoir |
| Top mount | Stem top |
| Bottom mount | Eyelet |
| Body diameter | 51 mm |
| Charge | Gas charged |
Vehicle fitment
It fits the 2008–2011 and 2013–2020 Toyota Land Cruiser in the Base and Heritage Edition trims. The 2012 model year is not included.
Land Cruiser years outside that list and other Toyota models are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The shock uses the vehicle’s existing mounting locations, so no drilling or welding is needed. Check the year before ordering, since the 2008–2020 range covers two separate year blocks.
What’s included
Check the mounting hardware against your existing setup before fitting.







