Overview
The Fabtech FTS92011 is a 4 inch dropped pitman arm for the 2005–2007 and 2011–2015 Ford F-250 and F-350 Super Duty with power steering.
A pitman arm turns the steering box motion into movement of the drag link, and Fabtech says dropped versions are necessary in many of its kits to correct the steering geometry after a suspension system goes on. Fabtech adds that it forges and CNC machines its pitman arms so they are stronger than stock units.
The FTS92011 is the Super Duty version for two separate year bands. It gives the front steering a 4 inch drop and is intended for owners running a lifted Super Duty.
The two year bands matter when you shop: Fabtech lists 2005 through 2007 and then 2011 through 2015, so a 2008, 2009 or 2010 truck is outside this part number. Compare your build year to the list below before you rely on the FTS92011.
Key features
- 4 inch amount of drop
- Front position
- For power steering
- Direct fit
- Covers 2005–2007 and 2011–2015 Super Duty trucks
- Forged and CNC machined
- It is forged and CNC machined, which is designed to give it more strength than a stock arm.
Steering geometry after a lift
A lifted truck changes the angle of the drag link, so the pitman arm sits in a different position than the factory design expected. Over time this can cause bump steer, uneven tire wear and a loose feel at the wheel. A dropped arm brings the linkage closer to its original geometry, but the drag link, tie rod ends and track bar should be checked at the same time.
Because the pitman arm transfers steering effort from the box to the linkage, its mounting nut and taper should be checked for torque and fit after installation. A wheel alignment is normally needed after any steering geometry change. Look for play in the steering box and worn joints if the wheel feels loose after the work is done.
- Inspect the drag link and tie rod ends at the same time
- Check the pitman arm nut and taper for fit
- Get an alignment after steering work
Specifications
| Brand | Fabtech |
|---|---|
| Part number | FTS92011 |
| UPC | 674866017559 |
| Product type | Pitman arm |
| Amount of drop | 4 inches |
| Position | Front |
| Fit type | Direct fit |
| Steering type | Power steering |
Vehicle fitment
The FTS92011 fits the F-250 and F-350 Super Duty in the 2005–2007 and 2011–2015 model years, in the trims below.
- 2005–2007, 2011–2015 Ford F-250 Super Duty (Harley-Davidson Edition, King Ranch, Lariat, Platinum, XL, XLT)
- 2005–2007, 2011–2015 Ford F-350 Super Duty (Harley-Davidson Edition, King Ranch, Lariat, Platinum, XL, XLT)
The 2008, 2009 and 2010 model years are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
It is a direct fit. Have a qualified technician check the work and the steering feel after installation, since this is a steering component.
What’s included
One pitman arm is included. Check the package contents against your installation before starting.








