Overview
The Trail Gear hub stud kit, part number 140438-1-KIT, is a wheel hub stud kit sold under one part number. It is labeled universal fit, so match the studs to your hub before ordering.
Hub studs must match the hub they go into, so the universal listing alone does not confirm a fit. Compare the stud dimensions with your current hub before buying.
Measuring before you buy
Hub studs are dimensional parts, so the match depends on the hub more than on the label. Diameter, thread pitch and length all need to fit the hub bore and the retaining method. A stud that is slightly off can seat unevenly, or it can be too short to engage the nut fully, which reduces clamping force.
Start by measuring an existing stud. Check the diameter across the threads, the length from the hub face to the tip, and the thread pitch with a gauge. Note whether the stud is pressed in or held by a retaining nut, since that detail decides how the new stud is installed.
Inspect the hub before fitting anything new. Clean the bore, look for elongated or damaged holes, and make sure the surface is flat. If the hub shows damage, replacing the studs alone may not restore a secure fit.
- Measure diameter, length and thread pitch
- Note whether the stud is pressed in or nut-retained
- Clean and inspect the hub bore before fitting
Specifications
| Brand | Trail Gear |
|---|---|
| Part number | 140438-1-KIT |
| UPC | 70000655507 |
| Part type | Hub stud kit |
| Stated fitment | Universal Fit |
Vehicle fitment
Universal fit is the only fitment. Match stud length, diameter and thread to your hub before ordering.
Measure stud length, diameter and thread against your existing hub before ordering. Confirm your vehicle’s year, model and trim before ordering.
What’s included
The kit is sold under one part number. Check the contents on arrival against the studs, nuts and washers your hub needs.









