Overview
The Trail Gear 140392-1-KIT is a hub stud kit, part number 140392-1-KIT, in the wheel stud category. The kit’s individual studs, hardware and sizes should be checked on arrival.
It is marked universal fit, yet no axle, vehicle, year or model is named, so match the kit against your existing hub hardware before buying.
Key features
- Hub stud kit from Trail Gear
- Part number 140392-1-KIT
- Marked universal fit
- Carries UPC 70000625522
Replacing hub studs safely
A hub stud holds the wheel hub to its flange or axle, and a loose or damaged stud can make the wheel wobble or shear under braking. Replacing one usually involves removing the hub, pressing out the old stud and pressing in the new one with the correct tool. A kit can contain studs of more than one length, so sort them and mark them as you remove the old ones.
Before installation, check the hub bore for corrosion, galling and worn splines, since these can prevent the new stud from seating square. Replace bearings or seals that are disturbed during the work, and clean the hub face. After the wheel is back on, recheck the nut torque after the first few drives.
- Sort studs by length before starting
- Check hub bore for corrosion
- Use a press tool suited to the stud
Specifications
| Brand | Trail Gear |
|---|---|
| Part number | 140392-1-KIT |
| UPC | 70000625522 |
| Part type | Hub stud kit |
Vehicle fitment
Confirm fit for your axle, vehicle and year before ordering. Check the kit’s contents and sizes against the hub you are servicing.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Hub stud work usually means disassembling the front hub, so have an experienced technician handle it. Follow a service manual for fitting steps.
What’s included
Check the kit’s contents and quantity against your hub before starting.









