Overview
The Trail Gear 144026-1-KIT is an ARP 2000 hub stud kit, part number 144026-1-KIT. It was developed with ARP for front axle use.
A failed hub stud can cost four wheel drive and may leave the hub unrepairable. The kit has 30 spline, six stud knuckles and chromo hub gears or drive flanges, and no vehicle or year is identified.
Key features
- ARP 2000 hub stud design developed with ARP
- 30 spline
- Six stud knuckles
- Chromo hub gears or drive flanges
Why spline count matters
Hub studs and splines transfer drive torque from the axle to the wheel, so their count and fit determine how well the drivetrain engages. A spline count that does not match the hub gear or drive flange can cause slop, wear or sudden failure under load. Stud knuckles carry the wheel load, so their layout must line up with the hub bolt circle.
Front axle hubs see heavy loads in four wheel drive, especially on steep grades and uneven terrain. Chromo hub gears and drive flanges are chosen for strength, but they still need inspection when the hub is opened. Check splines for rounding and studs for stretch before reassembly.
- Confirm spline count against the axle
- Check stud knuckle layout
- Inspect hub gears for wear
- Use a service manual for torque values
Specifications
| Brand | Trail Gear |
|---|---|
| Part number | 144026-1-KIT |
| UPC | 70000621750 |
| Part type | ARP 2000 hub stud kit |
| Spline count | 30 spline |
| Stud knuckles | Six |
| Hub gear material | Chromo |
Vehicle fitment
Fitment for 144026-1-KIT is unknown, with no vehicle or year identified. Confirm the kit’s spline count and stud layout against your front axle before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Replacing front hub studs involves disassembling the hub, so the work calls for front axle experience. Follow a service manual for your vehicle’s fitting steps.
What’s included
Confirm the individual components against your installation before starting.









