Overview
The Crown Automotive J8124803 is a replacement wheel stud with part number J8124803. Diameter, length, thread and material should be measured before fitting it.
It carries a universal fit marking, but no vehicle, year, model or hub is named, so check the stud against your hardware before fitting it.
Key features
- Replacement wheel stud
- Part number J8124803
- Universal fit marking
- Carries UPC 848399067729
Thread engagement and seat
A wheel stud is loaded in tension every time the lug nuts are tightened, so its thread must engage the nut fully and its seat must sit flat against the hub. Thread engagement depends on the stud length and the nut height, and a short stud can strip under load. A stud that sits crooked or with debris under it can loosen as the wheel settles.
Replacing studs is a good time to check the hub face, the brake rotor surface and the nut seats. Clean the threads and the hub face before installation, and avoid heavy lubricant on the threads unless the service manual calls for it. Torque lug nuts evenly in a star pattern and re-check after the first drives.
- Confirm thread engagement with the nut
- Clean the hub face and seat
- Avoid lubricant unless specified
- Re-check torque after the first drives
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | J8124803 |
| UPC | 848399067729 |
| Part type | Wheel stud |
Vehicle fitment
Fitment for J8124803 is unknown, with no year, model or hub identified. Check the stud’s dimensions against the hub you are servicing before ordering.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
Check the package contents against your installation before starting, including whether nuts or washers are needed.









