Overview
The ARB Housing Seal Kit, part 081803SP, is an Air Locker service part for a selectable differential locker. ARB gives its axle location as front and rear. It is a replacement seal kit rather than a complete locker, and it is shown with universal fit but no vehicle years, makes or models.
Key features
- Service part for ARB Air Lockers
- Covers front and rear axle locations
- Selectable locker type
- UPC 700007998131
Keeping an air locker sealed
An air locker depends on its seals to hold air and keep the housing clean. Seals age with heat, fluid and time, so a slow loss of pressure or a damp housing edge is often the first sign of wear. Keep an eye on the air supply line and the axle breather as well, since a problem in either can look like a seal failure.
Seal work is detailed. The axle housing must be opened, the old gasket cleaned fully and the new seal set without twisting. Fluid levels should be checked after service, and the locker should be cycled to confirm it engages and releases properly before heavy use.
- Clean mating surfaces thoroughly
- Replace all gaskets during service
- Check fluid level afterward
- Test engagement before heavy use
Specifications
| Brand | ARB 4×4 Accessories |
|---|---|
| Part number | 081803SP |
| UPC | 700007998131 |
| Differential type | Selectable locker |
| Axle location | Front and rear |
| Part type | Service part |
| Fitment | Universal fit |
Vehicle fitment
No vehicle years, makes or models are recorded. Universal fit is the only note given.
A seal kit is tied to the axle and locker it serves, so confirm the axle and locker type against your vehicle. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Air locker service typically involves opening the axle housing, so have a qualified technician carry out the work.
What’s included
The seal kit is the service part itself. Confirm you have any tools you need before starting the work.
Not included: the air locker itself.


