Overview
The ARB RD152 is a 9.5 inch Toyota air locking differential for rear axles with 27 splines. Air pressure engages the locker so both axle shafts turn as one, giving full spool operation from an open differential.
Toyota 9.5 inch rear axles with 27 splines are the intended application for this selectable unit. Drivers use it when one wheel loses grip, and the air system controls engagement.
Key features
- Air-activated locking of both axle shafts
- Full spool operation from an open differential
- Selectable locker for Toyota rear axles
- 27 spline axle configuration
Before you install
Toyota 9.5 inch rear axles with 27 splines rely on a clean spline match, so the first job is to confirm the count and condition of the axle shafts. Worn or damaged splines can cause the locker to slip or fail to engage fully. Inspect the shafts for pitting or rounded edges before the carrier is assembled.
The air side needs planning too. Choose a compressor location that stays dry and clear of heat, and route the air line away from moving suspension parts. Once installed, test engagement on a level surface and check the air fittings for leaks before the first trail trip.
- Inspect axle shafts for worn splines
- Route the air line clear of moving parts
- Test engagement on level ground
Specifications
| Brand | ARB 4×4 Accessories |
|---|---|
| Part number | RD152 |
| UPC | 881348011756 |
| Differential type | Selectable locker, air activated |
| Axle manufacturer | Toyota |
| Axle location | Rear |
| Axle type | Toyota 9.5 Inches |
| Axle spline count | 27 splines |
Vehicle fitment
No vehicle year or model is stated. The axle type is Toyota 9.5 inches with 27 splines, which is the basis for checking the locker against your rear housing.
Toyota axles with other diameters or spline counts are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Count the 27 splines on your axle before starting, since the locker must match the axle shafts. Air lines and a compressor must be in place to run the unit, so arrange them ahead of the install.
What’s included
This part number is the locker unit only. Not included: the air compressor needed to supply the locker with air.








