Overview
The ARB RD121 is a front air locking differential with 30 splines, sold for the Toyota 8 Inch IFS axle that its title ties to the Tacoma and FJ. Air pressure converts the open front differential to a full spool.
The axle type is recorded as Toyota Tacoma, and no model years are given. An ARB onboard compressor is needed, and it is sold separately.
Key features
- Front selectable locker
- 30 spline design
- Full spool operation with air engagement
- Toyota axle type named Tacoma
Matching labels to your axle
Axle labels on lockers are a quick shorthand, and a mismatch can waste a trip. Compare the axle type, spline count and position against the axle you pull out, rather than relying on a model name alone. Front lockers for Toyota axles can look similar, so check the part number on the box before fitting.
A front locker is usually installed by a shop that knows the front axle, since the carrier and CV joints share the same workspace. Note the carrier part number, bearing sizes and seal condition during disassembly, and replace worn parts while the carrier is out. Air lines should be routed clear of steering and exhaust heat.
- Read the axle code from the old carrier
- Measure the spline count before buying
- Keep the part number with your install records
Specifications
| Brand | ARB 4×4 Accessories |
|---|---|
| Part number | RD121 |
| UPC | 88134800690 |
| Axle manufacturer | Toyota |
| Axle location | Front |
| Axle type | Toyota Tacoma |
| Axle spline | 30 splines |
| Differential type | Selectable locker |
Vehicle fitment
No model year is given for the RD121, so the Tacoma and FJ names are not enough to confirm fit. Match the front axle type and spline count before ordering.
Other Toyota front axles in this line carry separate part numbers.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Front locker work requires removing the carrier and setting the gears. A shop with Toyota front axle experience should handle the install and the air line routing.
What’s included
Look over the delivered parts against your installation plan before work begins.
Not included: an ARB onboard compressor, which is sold on its own.







