Overview
The G2 Axle and Gear 10-2043SS is a solid pinion bearing spacer for Toyota 8 inch V6 axles. It takes the place of a crush sleeve and maintains pinion bearing preload. G2 Axle and Gear designed it for high performance engines and oversize tires, where crush sleeves can fail.
Key features
- Solid spacer designed to replace a crush sleeve
- Maintains proper pinion bearing preload
- Preferred in high performance applications
- Designed for Toyota 8 inch V6 axles
- Front and rear axle locations listed
Preload and pinion setup
A crush sleeve is compressed once to set pinion bearing preload and is then discarded. A solid spacer keeps that preload fixed by length, so the pinion depth and bearing preload must be set during assembly. This is why the swap is handled as a setup job rather than a simple bolt-in change.
Engines with more torque and tires that change the effective gearing put more load through the pinion bearings. A solid spacer is often chosen in those builds to avoid crush sleeve failure. Check the pinion bearings, pinion seal and pinion nut for wear whenever the spacer is changed, and replace any worn part before reassembly.
- Measure pinion preload with a proper gauge
- Replace the pinion nut when the spacer changes
- Inspect pinion bearing cups and cones
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 10-2043SS |
| UPC | 682034312986 |
| Type | Solid pinion bearing spacer |
| Axle type | Toyota 8 inches, V6 |
| Axle location | Front and rear |
| Fitment listed | Universal fit |
Vehicle fitment
No specific vehicle is confirmed for this spacer. The Toyota 8 inch V6 axle is the match point, so check your axle housing against that design. Confirm your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Replacing a crush sleeve with a solid spacer changes how pinion preload is set, so the pinion setup should be checked by a qualified shop rather than treated as a simple drop-in part.
What’s included
Only the pinion bearing solid spacer is described.
Not included: the pinion bearings and the pinion nut are not part of this spacer.









