Overview
The G2 Axle and Gear 85-2015M-26 is a mini spool for GM 10 bolt 7.5 inch rear axles with 26 splines. It is CNC machined from 4130 billet steel and presented by the brand as a traction device that avoids the setup trouble of other options.
A 26 spline count matches this unit to the axle shafts, so confirm that number before choosing it. GM 10 Bolt 7.5 inch is the axle type, and GM is the common axle family for it.
Key features
- Mini spool for GM 10 bolt 7.5 inch rear axles
- 26 spline axle fitment
- CNC machined from 4130 billet steel
- Economical traction option
GM 10 bolt traction and setup
On a GM 10 bolt 7.5 inch axle, a mini spool replaces the open carrier action with a locked connection between the axle shafts, which helps when one wheel lifts. The setup is only as good as the axle shafts, so check spline wear before assembly and keep the shafts matched to the spool.
Owners who run this spool often change the gear oil and check the axle bearings at the same service, since the locked axle adds load. Keep the pinion and ring gear set matched, and watch for noise or heat after the first drives, which can point to a setup issue.
- Check axle shaft spline wear
- Inspect bearings during the rebuild
- Re-check after the first few drives
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 85-2015M-26 |
| UPC | 631410103564 |
| Axle type | GM 10 Bolt 7.5 inches |
| Popular axle manufacturer | GM |
| Axle location | Rear |
| Axle spline | 26 splines |
| Differential type | Spool |
| Material | 4130 billet steel |
Vehicle fitment
Universal fit, with GM 10 Bolt 7.5 inches as the axle type. Model years and chassis codes do not set fit here, so match the housing and spline count to your axle.
Axles outside the GM 10 bolt 7.5 inch housing named here fall outside this spool’s stated fit. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Installing a spool means opening the housing, removing the carrier, and setting ring gear backlash and bearing preload. Shops that handle carrier setup are the usual choice for this step.
What’s included
The mini spool only.
Not included: a separate carrier, ring gear, pinion and bearings.







