Overview
The G2 Axle and Gear 85-2034-4-30 is a 30 spline full spool for rear Dana 60 axles, designed for 4.56 Up gearing. Once installed, it locks the axle shafts together so both wheels receive power when one wheel is in the air. It is CNC machined from billet 4130 steel.
Key features
- Full spool with 30 spline shafts
- Billet 4130 steel, CNC machined
- Rear Dana 60 axle type
- Designed for 4.56 Up gearing
- Spool differential type
- Light weight construction, per the manufacturer
Installing with 4.56 gears
A full spool suits drivers who need both wheels to turn when traction is poor, such as rock crawling or deep mud. The trade is that tight turns on pavement can bind, because the axle shafts cannot run at different speeds. Many owners keep the spool for trail use and run a different setup on the road. Expect extra wear on the drivetrain under load.
Gears set for 4.56 Up need a careful install. Check tooth contact, backlash and bearing preload after the carrier goes back in. A shop with setup experience can confirm the pattern and avoid noise later. Replacing worn seals and bearings during the job keeps the rebuild from being repeated soon.
- Ring and pinion pattern
- Carrier bearings and seals
- Gear oil at the correct level
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 85-2034-4-30 |
| UPC | 631410103410 |
| Differential type | Spool |
| Material | Billet 4130 steel, CNC machined |
| Axle type | Dana 60 |
| Axle location | Rear |
| Axle spline | 30 splines |
| Gear ratio | 4.56 Up |
| Popular axle manufacturer | Dana |
| Fitment listed | Universal fit |
Vehicle fitment
This spool is not tied to a single vehicle. The listed fitment is universal for rear Dana 60 axles with 30 spline shafts, so check the spline count on your axle before ordering.
The 35 spline version, 85-2034-4, is a separate part number and is meant for 35 spline shafts. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Spool installation replaces the open differential, which usually requires removing the carrier and checking the ring and pinion pattern. Have a qualified shop handle the install and set up the 4.56 Up gearing.
What’s included
Only the spool itself is included.
Not included: bearings, ring gear and pinion hardware must be sourced separately.






